Kegerator cabinet diy

Kegerator cabinet diy DEFAULT

Kegged beer hits different, doesn’t it? Beer directly poured from a keg is more flavored and tastes fresher than the bottled or can ones. Especially if you’re someone who brews at home or thinking of doing so, a kegerator is a must.

Since kegerator can be really expensive, most people build their own using an old fridge and kegerator conversion kits as DIY kegerator costs cheaper.

If you’re also interested in DIYing a kegerator, here we’ve compiled a list of 17 best kegerator DIYs; most of which will provide you instructions on how to convert your mini-fridge into a kegerator.

Table of Contents

1. Kegerator Build with Fridge Teardown

With a whooping number of positive reviews in the comment section, this YouTube video is a perfect tutorial for you if you’re planning to convert your mini-fridge into a kegerator. The video is very elaborate and gives you no room for confusion.

The design in this video fits two 8.5” diameter corny kegs and a 5 lb CO2 tank. To protect the coolant lines from being drilled, the Youtuber first tears down the fridge and then begin with the further DIY works.

 

2. DIY Kegerator (E7)

Using a kegerator conversion kit and a second0hand fridge, this Youtuber puts together his own kegerator. He shares step-by-step instructions for his viewer on how he assembled the two-tap tower kegerator.

However, while you’re drilling the holes for the tower and gas lines, make sure you’re not disrupting any coolant lines.

 

3. Keezer Build – Converting an Old Chest Freezer into a Kegerator

If you have an old chest freezer in your house, it will make an excellent kegerator. This guy picked up a chest freezer from his friend for free and made a three-tap portable kegerator with wheels attached at the bottom.

He further adopts a smart idea of adding a collar to the freezer to attach the faucets as it ensures that the freon lines are not hit during the drilling process.

 

4. How to Convert a Fridge into a Kegerator

How to Convert a Fridge into a Kegerator

Are you planning on converting your Smeg refrigerator into a kegerator? If yes, this tutorial is for you. This site will make your kegerator DIY project very easy as the measurements, conversion kits, tools required along with in-detail instructions are provided.

A video tutorial is also embedded in the post for your ease. However, if the type of refrigerator you own is different, note that the measurements might vary accordingly.

Check this tutorial

 

5. How to A BUILD a DIY KEGERATOR from a FRIDGE | Homebrew

By following this tutorial, you’ll be making a kegerator from a fridge at less than $300. The best part of this YouTube video is that you’ll get links for all the items used in the description section. The instructions are straightforward and very informative.

A piece of solid advice for you – skim the comment section for a 4-paragraphs long comment, and you’ll learn pretty invaluable tips on how not to hit coils on the fridge while drilling.

 

6. HOW TO BUILD A BEER FRIDGE (KEGERATOR CONVERSION KIT)

Horizontal splits refrigerators are most popular and convenient to convert into a kegerator. If you own one, make sure to watch this easy tutorial on how to build a kegerator using such refrigerator and keg conversion kits.

You can find written instruction in the description box along with some kegerator conversion tips. In case you encounter any problems, the Youtuber also has provided a contact number at the end.

 

7. DIY Kegerator from a minifridge

This guy uses the parts of an old kegerator that had been drinking electricity to convert his mini-fridge into a one-tap tower kegerator. He also shares an excellent trick on how to know where the heating wires are present.

Though the video is long, it is very informative, and especially if you’re a newbie, you should definitely check this video out.

 

8. DIY Draft: Step-By-Step Kegerator Plans

DIY Draft Step-By-Step Kegerator Plans

This DIY draft is an all-in-one guide on building a kegerator using freeze. From disassembling the fridge to making a cooling system for the tower, you’ll get every information you need on the site.

In the first step, a keg dimension chart link is also embedded for your convenience, and two beneficial expert tips are provided at the end. So, if you’re unsure where to start, this post might serve your purpose.

Check this tutorial

 

9. How to Build a Keezer or Kegerator for Serving Beer at Home

Chest freezers make a great kegerator as these are mostly spacious and can accommodate a larger number of kegs and faucets compared to a mini-freezer.

The Youtuber of NorthenBrewer Tv channel shares with you some tips on things you should consider while buying a chest freezer. If you already have one available, you’re good to go! Just follow the tutorial and make a five-tap kegerator for yourself.

 

10. How to Make a Kegerator

How to Make a Kegerator

It is a short and to the point how-to guide. Five simple steps and its description, along with the items you will need to start the DIY are provided in this blog post. A tutorial video is also embedded in the post where a guy converts a mini refrigerator into a kegerator.

In case you’re wondering where to buy a CO2 tank as it does not come in a kegerator conversion kit, the answer is also in this blog.

Check this tutorial

 

11. Kegerator Cabinet Build [Part 3]- DIY Kegerator build using a Danby 4.4 mini fridge

Unlike other kegerator DIYs videos, it is a part-3 video of a DIY series on building a kegerator cabinet instead. However, if you plan to convert an affordable Danby 4.4 mini fridge into a kegerator, you should give this video a watch.

If you’re interested in building a home bar cabinet that accommodates a wine freezer and a kegerator, we highly recommend you to watch part 1 and part 2 of the DIY.

 

12. DIY how to make a beer kegerator out of an old refrigerator for less than $100

It just gets better and better, doesn’t it? Follow this tutorial if you want to convert your old refrigerator into a kegerator under $100.

This tutorial is super easy to follow along as the tap is connected to the front door. In this DIY, you don’t even have to worry about hitting the coolant lines.

 

13. DIY Kegerator Conversion for Beer & Kombucha | Keezer Craft Bee

The Youtuber makes a kegerator that dispenses beer, kombucha as well as nitro coffee using a chest freezer and a kegerator conversion kit.

However, you can also customize this DIY to make a simple kegerator that dispenses chilled beer from a chest freezer of your choice.

The best part of this video is that the Youtuber demonstrates a crystal-clear procedure for installing a temperature controller, an essential part of this DIY process.

 

14. HOW TO BUILD A KEGERATOR

HOW TO BUILD A KEGERATOR

If you’re not very informed on kegerators and its conversion process, reading this blog post once might be a brilliant decision.

From ‘what is kegerator’ to the selection of the best type of refrigerator and in detail procedure, you’ll find most of the kegerator information on this site. If you are interested in knowing a few money-saving tips, you’ll find it for almost every item in this post.

Check this tutorial

 

15. Keezer Build Timelapse with Interchangeable Herringbone Top

You would only want to see this video if you’re good at woodworks, know basics on how to install a kegerator conversion kit, and looking forward to building a kegerator mini bar using a chest freezer for your home.

This time-lapse video showcases how a guy creates a fantastic three-tap kegerator. If you have the required skills and tools, this kegerator design is far better than just attaching the faucets on the collar.

 

16. Our kegerator build

Our kegerator build

This written tutorial will guide you on building a two-tap kegerator from a mini-fridge in a hassle-free way. The kegerator accommodates a keg and a small CO2 cylinder and doesn’t require you to worry about coolant lines as the taps are attached to the fridge’s front door.

Check this tutorial

 

17. DIY Kegerator Conversion Shopping List

It is not necessarily a DIY kegerator but can be incredibly helpful if you’re not certain on what materials you require to build a kegerator. The Youtuber explains every item needed to convert a Danby 4.4 mini fridge into a kegerator in detail.

Even if you have a different type of fridge, we still recommend watching this video because he also briefs on their functions and talks about various other alternatives available.

 

Summary

You can easily buy a kegerator, but the designs are limited in the market, and the price can reach up to $700 and higher.

On the other hand, if you build your kegerator, you can add your idea and customize it accordingly. Furthermore, the price is significantly lower if you make a kegerator, especially if you have an old fridge beforehand.

So, if you have the required skills and tools and love drinking chilled beer just poured out of the keg, building your kegerator should be a no-brainer.

Sours: https://www.luckybelly.com/how-to-make-a-kegerator/

If you homebrew, having a kegerator makes drinking incredibly easier. But if you’re thinking of buying a kegerator, it costs quite a lot. But you have nothing to worry about as you can DIY a kegerator yourself!

Why spend a fortune on a kegerator when you can DIY one for yourself for cheaper! You can convert your old mini-fridge or even a chester fridge into a kegerator. In this post, we’ve gathered some creative DIY kegerator ideas for you. Let’s get started!

1. DIY Draft: Step-By-Step Kegerator Plans

DIY Draft Step-By-Step Kegerator Plans

Do you want to spend $700 on a ready-made kegerator, or do you want to learn an excellent way to make the system in your home all by yourself? If you fall into the latter category, popular mechanics has step-by-step kegerator plans for you to build it on your own.

By following this tutorial, make your own kegerator at about $400, few hours of hard work, and some basic DIY skills.

Check the Details

 

2. DIY Kegerator

If you are a beer lover and have some free time, here’s a step-by-step video tutorial from TheBeardyman Craft Beers showing how you can put together your own kegerator from a second-hand fridge brought for $30 and beer tap faucets for $18 online.

The Youtuber estimates the overall cost of this DIY to be around $130, and remember, this cost does not include the price of corny kegs and CO2 cylinder.

 

3. How to Build a Kegerator

How to Build a Kegerator

If you have an extra refrigerator at your home, then you might want to build a kegerator from it and save some serious amount of money in the process.

By following this site’s instruction and with a few hours of work and a couple of tools, you will have your favorite kegged beverage on tap in time! If you want to build one, there are a few basic kegerator styles you can go along with.

Check the Details

 

4. DIY how to make a beer kegerator out of an old refrigerator for less than $100

This video tutorial from Noe Arriaga teaches you to make a kegerator from an old refrigerator for less than $100. The tools required to complete the work can be bought for around $50 and are mentioned in the tutorial.

After collecting the tools needed, you just need to follow the stepwise instructions as shown in the video tutorial, and finally, you can enjoy beer from your own DIY kegerator.

 

5. How to build your own kegerator and install it in your countertop

How to build your own kegerator and install it in your countertop

This site shows how you can build a kegerator by yourself and install it on the countertop. Using a simple dorm-style compact fridge, CNET’s technical editor, and medium to a high level of DIY skills, you can do this project for an approximate cost of $360.

The tools required and the stepwise instruction are detailly explained on this site. You just need to follow them, and the next thing you will have in your home is your own kegerator!

Check the Details

 

6. DIY Kegerator from a minifridge

The Youtuber Jack Steve has shown how you can make your kegerator from a mini-fridge. He also assures you that this kegerator is power efficient. This tutorial also teaches you to find the area of heat on the kegerator using paint and how you can remove it.

This tutorial also helps you connect the stainless drip tract grab on your kegerator to make it more attractive and professional. You can also customize the top of the mini-fridge for an aesthetic look.

 

7. HOW TO BUILD A KEGERATOR

HOW TO BUILD A KEGERATOR

If you are thinking of DIYing your own kegerator, this site provides you with the 5 easy steps you need to follow to make a kegerator at your home.

You will start by measuring the inside of the refrigerator to determine the number of kegs it can hold. The blogger further suggests you build a strong bottom shelf to support your kegs.

Check the Details

 

8. Kegerator Cabinet Build

This video tutorial from Travis Adventure Projects teaches you a DIY kegerator build using a Danby mini-fridge and to install it in your kegerator cabinet. This tutorial will walk you through all the steps you need to fully convert the Danby fridge into your very own kegerator.

The products required to complete the project are also listed on the video’s description, along with the affiliated Amazon links.

 

9. 2 Tap Cornelius Kegerator

2 Tap Cornelius Kegerator

If you are a homebrewer, you can always create your own home kegerator with two Cornelius kegs using a mini-fridge. This site guides you to make a kegerator by providing you with the list of materials needed and the steps you need to follow.

The estimated expenditure for this project is around $450 to $600. Finally, the blogger also recommends taking Norm’s advice and measure twice before drilling.

Check the Details

 

10. How to Build a Keezer or Kegerator for Serving Beer at Home

Northern Brewer shows you a way to build a keezer, where a standard deep freeze cooler is transformed into a beer serving device. The Youtuber also claims that it is a straightforward process that results in many years of homebrewed draft beer on a multitude of taps.

Moreover, one of the commenters has suggested adding some stain or paint for the collar for the adhesive cures. The Youtuber believes that the DIY kegerator can also be used for commercial purposes.

 

11. How to Make a Homemade Kegerator

How to Make a Homemade Kegerator

Why buy an expensive kegerator when you can build it yourself for a fraction of the cost. It’s a lot easier than you imagine.

With a few components, a little patience, and a can-do attitude, you can easily make your own homemade kegerator. The written tutorial provides you a step-by-step guide to convert a mini-fridge to a kegerator.

Check the Details

 

12. DIY Kegerator

The Art of brewing has the perfect video tutorial for making a kegerator from an old refrigerator, which you were thinking of throwing away. You can use 1-2 kegs as per your use and space in the refrigerator.

For attaching the draft tower at the top of the refrigerator, you need to use some power drills. Remember, if you’re inexperienced in handling power tools, seek expert supervision before using them.

 

13. How to make a DIY Kegerator

How to make a DIY Kegerator

This blog by Kegfridge will provide you with homebrewing tips on how to DIY a kegerator.

You just need to follow the 20 basic steps mentioned on the site, and the next thing you will have is your own kegerator. You must seek expert advice if you get confused because the more skilled the worker, the better!

Check the Details

 

14. Keezer Build 🍺 Converting an Old Chest Freezer into a Kegerator

You don’t need to be rich to own a kegerator; all you need is the right parts, tools, and DIY kegerator tutorial like this one! This site simply teaches you to DIY a kegerator at a very affordable price.

If you have an old fridge at your place, follow this step-by-step, easy guide to DIY your own kegerator.

 

15. How to Build a Kegerator – Easy DIY!

How to Build a Kegerator – Easy DIY!

The Youtuber from the Rogue Engineer begins to convert an old chest freezer into a kegerator by removing all the rough spots from the freezer and painting it to give it a whole new look. You can follow this video tutorial to make your own.

You can use plywood as in the tutorial to make the collar. Likewise, it would be best if you used silicone at the joint of the freezer and collar to prevent air movement. Moreover, you can make your kegerator portable by adding casters.

Check the Details

 

16. How to Convert a Fridge into a Kegerator

How to Convert a Fridge into a Kegerator

Do you have any old, ugly refrigerator you bought off Craigslist or have sitting around in your garage? This site provides step-by-step instruction that will loosely work to convert it into a kegerator. But for this specific DIY, a Smeg refrigerator is featured on this site.

The only difference you might face on other refrigerators would be the amount of insulation that your refrigerator has, which might cause you a minor headache during the construction of the kegerator.

Check the Details

 

17. How to build a kegerator

How to build a kegerator

Do you want a kegerator at your place? Do you have any idea of making it? If the answers to the above questions are yes and no, Civilized Health is the right place for you to learn the process of making it.

All the necessary components are listed on the site, along with the 11 steps you should follow to complete the project.

Check the Details

 

Summary

A kegerator system keeps your beer cold and carbon dioxide content in check. If you have a kegerator, homebrewing becomes a lot easier. You might have already decided which of these 18 DIY kegerator ideas is most doable to you. If you’ve not, do it already!

Almost all of these tutorials are detailed and don’t require many fancy tools. So, even if you’re a beginner to these kinds of DIYs, you can attempt to do it on your own. So, gather the supplies, and may you make a fantastic kegerator!

Sours: https://renegadebrewing.com/how-to-make-a-kegerator/
  1. Cloud pic drawing
  2. Psycopg2 timeout
  3. Best zombie sword

If you love beer, the benefit of a home kegerator is obvious. Unfortunately, the drawbacks of buying a commercial kegerator, a modified refrigerator-and-beer-tap system, are daunting. Quality kegerators are expensive, you might not have room for a big, industrial-looking block in your home, and you might not be able to get your favorite beer in a full keg anyway. Stores that rent full kegs typically fill them only with a couple of mass-produced beers, which won't be exciting for craft beer fans.

Well, break out your tool box, because we'll show you how to build a kegerator yourself and install it in a countertop. Using a simple dorm-style compact fridge (2.7 cubic feet), CNET's technical editor Steve Conaway and I did this project ourselves for a reasonable $360, and purposely designed our system to dispense beer from two mini kegs. Mini kegs are easier to acquire and fill than their full-size cousins. You might even be able to fill one with craft beer from your local microbrewery, or you can fill them with homebrew to really wow your friends.

Note that this project takes a medium to high level of DIY skill. You'll need the following tools: an oscillating tool, a drill, a soldering iron, two 2-½-inch hole saw bits (one for countertop material and one for metal cutting), assorted screwdriver bits, expanding foam, a tape measure, clear silicone, wire cutters/strippers, metallic duct tape, wood screws and some scissors or a cutting tool. If you have those on hand, and drilling a hole in your countertop for the sake of better beer sounds like fun, let's get started.

ludacris.jpg

Step 1: Gather your supplies

You'll want to do some shopping before you start slicing and dicing. We've listed what we paid for reference, but your costs may vary. You might be able to find better deals than we did, and you'll definitely pay less if you only buy a single-faucet tap -- then you'll only need a single keg and a single conversion kit as well.

  • Dorm fridge (We found our model on sale for $88.)
  • 2-inch schedule 40 PVC pipe, at least 12 inches long ($5)
  • Double faucet tower ($85)
  • 3 feet of ½-inch plastic tubing ($8)
  • Computer fan ($5. We used this 80mm model)
  • Tupperware bowl ($2. We used a 5-cup container. The exact size doesn't matter as long as it's bigger than the fan)
  • AC adapter ($8. You need a plug with as many volts as your fan that supports as many amps. An old cell phone charger should work.)
  • 2 extension cords, at least six feet long ($9)
  • A length of wood ($4. We recommend a piece 3/4 inch thick, 5 1/2 inches wide, and a length cut to fit your cabinet opening.)
  • 2 mini kegs ($32, $16 each)
  • 2 mini keg conversion kits ($90, $45 each)
  • 2 threaded plugs ($18, $9 each. Something like this should work. You'll need it to plug one end of your carbon dioxide regulator. Take the regulator to your local hardware store to find a good fit.)
  • 2 ¼-inch stainless-steel double barbed connectors ($4, $2 each).

Step 2: Prep your countertop

After you have your tools and supplies, pick a cabinet to be your victim (preferably one close to an outlet), and let's get to work. You'll want to make the interior of the cabinet a single empty cavity with a single door. If your cabinet, like ours, has a drawer as well, you'll need to take that out, too, along with any rails, drawer hardware or anything else that might block the refrigerator from fitting inside.

You might also need to combine your drawer face and cabinet door to make a single door that covers the whole interior of the base cabinet. If your door/drawer combo requires a gap between them, use a piece of wood to match the cabinet finish. I suggest something about three-quarters of an inch thick, by about 5.5 inches wide. Cut its length to match the width of the cabinet opening. Using wood screws, attach the wood to both the drawer face and cabinet door. Once you're done, set aside your new door until the end of the project.

Now, it's time to drill a big hole in your counter. Decide where you want your draught tower. You'll want to leave at least 7 inches of space from the center of the tower to both the back and front of the counter.

Next, open the fridge and closely examine its ceiling for coolant lines. It's critical to avoid drilling into them, or you'll ruin your fridge. (In most dorm fridges, they run up from a compressor shelf in the back and into a metal sheet forming a freezer compartment.)

Put the fridge into the cabinet. Check the manual of the fridge to see how much room it needs for airflow and adjust your placement accordingly.

Make sure you don't have any obstructions in the fridge beneath the spot where you'd like your tap handle -- the hole in your fridge will need to line up exactly with the hole in your counter. We picked a spot far enough back in the fridge to avoid the thermostat. You can do the same, or move the thermostat if it's in the way by unscrewing it and finding a different spot for it.

We did have to move the left wall of our freezer compartment. This problem was easy to fix -- Steve detached that side of the freezer and gently bent it flat with his hands.

Once you find a spot that works aesthetically on your countertop and logistically on your fridge, it's time to drill. For our laminate countertop, we used painters' tape to cover the area and prevent splintering, and then drilled with a basic wood saw bit. If your counter is granite or some other harder material, you'll want to consult a professional for this part, as stone surfaces can easily crack, and repairs would be costly.

Step 3: Prep your fridge

Make sure your mini kegs fit in your fridge and the door closes securely. If you're only using one keg, you'll have an easier time. Our pair of kegs didn't fit, so we had to do a little customizing to the fridge interior.

I removed the fridge door (we were going to do this anyway to switch the hinges to the other side so both the cabinet door and fridge door would open on the same side). Then Steve took an oscillating tool and went to town, carving out all of the interior hardware and shelving on the fridge door. There are no internal moving parts to the door, only foam, so you don't have to be too careful. Just make sure you don't cut the rubber seal that runs around the outer edge of the door.

Put the fridge back in the cabinet, then run your PVC pipe through the hole in the counter and rest it on the top of the fridge. Use a marker to trace its outline on the fridge, then pull the fridge out and make sure that hole is more or less centered, and at least two inches away from any edge.

Now take your metal saw bit and cut through the top of the fridge. Go slowly with this step to avoid any wires hidden in the fridge insulation. You can double-check for wires by removing insulation with a screwdriver when you've cut through the outer shell of the fridge's top. Once you're all clear, keep drilling all the way through.

Finally, find the nearest outlet, and drill small holes through the back corners of your cabinet to make a path for the extension cord.

Step 4: Install the fan

By now I imagine that you're ready to kick back with a beer. After all of that work I was thirsty, but while we could have just installed the tap handle, we went a step beyond by building a tap-handle cooling mechanism from a laptop fan and a 5-cup Tupperware container. Who wants beer sitting in warm pipes between servings? Not me.

Install the fan in a Tupperware container by cutting a hole in the lid large enough for the fan blades. Attach the fan to the inside of the lid using the screws that come with it so that the fan pulls air into the container.

Drill a small hole into the Tupperware large enough for the fan's power wires, and another large enough for half-inch tubing. Pull the wire through the first hole and the tubing through the second, close the container, then use clear silicone to seal both holes and around the edges of the fan.

Check the sticker on your power adapter -- you can probably use an old cell phone charger -- and make sure it matches the voltage of the fan and has at least as much amperage. For an old cell phone charger, cut off the end that attached to your phone, and strip the two remaining wires. Attach them to the power wires of the fan. Plug the charger in to make sure the fan works, then solder the wires.

We used Velcro with an adhesive backing to attach the Tupperware container to our compressor shelf and our fan was ready to go.

Step 5: Install the tap handle

With most of the drilling and wiring done, it's time to start putting everything in place and securing it there. Reattach your fridge door -- make sure it'll swing the same way as your cabinet door -- then put the fridge in place.

Lower the male end of your extension cord through the cabinet hole, but make sure it doesn't go into the fridge -- you'll want it resting on the outside of the fridge as you install the PVC pipe. Leave the female end of the extension cord on top of the counter for now.

Insert the PVC pipe into the counter and the fridge. Make sure it's at least an inch into the fridge, then measure the pipe six inches above your countertop. Cut off any excess above six inches, then insert the pipe one last time and seal it an inch into your fridge with moisture resistant, metallic duct tape.

Loop the female end of the plug into the top of the pipe and adjust it so that the end rests on the compression shelf with your fan. Plug in your fan.

Permanently seal the PVC pipe to the fridge using expanding foam. Be sure to take all safety precautions listed on your expanding foam. You'll have to reach in between the top of the fridge and the bottom of the countertop to apply the expanding foam around the PVC pipe. You will need very little foam to finish the job.

Finish by assembling your faucet tower. You shouldn't have to do much, depending on the model you purchase, but check the instructions. All we had to do was attach the two faucets and handles to the tower.

Your tower will have supply lines that'll deliver your beer to the faucets. Drop those into your fridge through the PVC pipe and lower the tower onto the counter. Center it, then screw the base down onto the countertop.

Now, push the tubing from the fan into the pipe (the spacing will be tight enough that it'll stay). Then, reattach your cabinet door, plug your fridge and your fan into another extension cord next to the fridge, and run that cord to an outlet.

Step 6: Attach your kegs

Now, all you need to do is hook up your kegs and sip on the fruits -- or hops -- of your labor. Filling your mini keg at a microbrewery won't be any harder on a bartender than filling a standard growler (a beer jug that usually holds 64 ounces) as they can use the same hose they normally would. Be sure to call ahead before you make the trip. Some states have regulations against filling containers over a certain size. If you run into trouble, you can always fill your keg with your own batch of homebrewed beer.

Filled kegs in hand, you just need to tap each keg with a conversion kit (the parts that actually suck up the beer from the keg and deliver it to the tap) that you can buy online. Note that you can buy mini kegs of beer in some liquor stores, but since those come pressurized, you'll need a different kit to attach those kegs to your setup than you'd use if you've filled an empty keg.

The fridge and cabinet setup we have could actually work with several types of kegs and carbon dioxide tanks. Customize as you see fit; just make sure your kegs are short enough to fit in your fridge. The mini kegs we describe are the cheapest option to get started.

Sanitize the part of the conversion kit that goes into your beer and slide it into place. Then, plug in your carbon dioxide regulator using the provided hose and attach the kit's hose to your faucet's supply line. I had to plug an extra valve into our regulator, which I did by removing the black thumbscrew opposite the pressure gauge and tightening down a capped metal fitting.

You'll need to cut off any existing connector already on the faucet supply line, and insert a stainless-steel double-barbed fitting. Make sure you don't use brass fittings anywhere that will come into contact with beer -- you'll end up with contaminated beer that will erode the metal. Attach the other side of the barbed fitting to the supply line from the tap assembly. Repeat the process if you are using two kegs.

Step 7: Enjoy

Once you've slid both mini kegs into the fridge and you're ready to start pouring, attach the CO2 cartridge to the regulator from the kit and turn the knob to start gas flowing. Grab your favorite glass, pull the handle and pour yourself a tall, cold one. You deserve it.

This story appears in the spring 2017 edition of CNET Magazine. For other magazine stories, click here.

Sours: https://www.cnet.com/home/smart-home/how-to-build-your-own-kegerator-and-install-it-in-your-countertop/
DIY Kegerator

Danby DAR044A6BSLDB Kegerator Cabinet Build

Wanted to share my most recent project. Really happy with how it turned out and hoping others will enjoy as well!

Materials to build this was what I asked for for Christmas and my wife didn't disappoint! She bought me the Danby 4.4 cu. ft. mini fridge that Costco has for sale right now. I ended up piecing everything together, to get exactly what I wanted/best prices. Kegconnection and Brew International were the two places I ended up getting all my kegging equip. from. Ended up costing around $750. That's everything: cabinet materials, mini fridge, keg equip.

Now the part anyone everyone else cares about, the pictures. (Sorry to anyone with slow internet speeds...)

Building the cabinet frame.


Siding and wheels attached.


Testing how it fits.


Sat like that for awhile while I tried to figure out what I wanted to do for the cabinet top. Ended up finding a 6' table top from Ikea on Craigslist for a ridiculously good deal.


Cut the top down to size along with the floor of the cabinet.


Staining finished.


Getting door ready to be attached.


Everything put together and in living room.




I only have one keg currently, so no need to cut into the door of fridge yet.


To try and keep the line cool, I have copper running up into the tower. Interior of the tower has pipe insulation between copper and the steel tower.


Absolutely love the tower!


Back is open so that there are no issues with the fridge.


Hope you guys enjoy! I looked through SOOOOOOOO many of the builds on this site to figure out what I wanted. Thanks everyone!

 

Sours: https://www.homebrewtalk.com/threads/danby-dar044a6bsldb-kegerator-cabinet-build.573149/

Diy kegerator cabinet

This is a TV, something like a cinema. Only then does he show a movie without film. But now you will not turn it on, since there is no electricity. I answered the girl, comparing the TV to the cinema, which was popular during the years of the revolution. Wonderfully somehow, this box itself shows a movie.

DIY Single Tap Kegerator Build

What happened. had to happen sooner or later. She is. pier saw passionate looks. thrown Bones at her and knew.

Similar news:

She wrinkled his soft ass and said. How your ass turns me on. Max, I want you here and now.



14145 14146 14147 14148 14149