Ge dishwasher insulation

Dishwasher Installation

STEP 24: REPLACE TOEKICK

• Place toekick against the pre-toekick (on some models) and

legs of the dishwasher.

Figure AH

Attachment

Screws

Toekick

• Align the toekick with the bottom edge and make sure it is

DJDLQVWWKHÀRRU

• Insert and tighten the 2 toekick attachment screws. The

WRHNLFNVKRXOGVWD\LQFRQWDFWZLWKWKHÀRRU

• When reinstalling the toe kick on models with a sound barrier,

ensure that the bottom edge of the rubberized flap is flush
with the floor. Any excess material should be tucked up
behind the outer door. Do not allow excess rubberized flap to
lay on the floor. If any excess is not tucked completely behind
the outer door, it will bunch up between the door and toe kick
and impede proper opening and closing of the door. This will
be noticeable because the door will not stay fully open and
will spring up.

Tip:Reduce sound from under the dishwasher. Make sure
toekick is against floor.

STEP 25: LITERATURE

• Be sure to leave complete literature package, these

Installation Instructions and product samples and/or coupons
with the consumer.

13

Sound

Barrier

STEP 23: POSITION INSULATION, PRE-

TOEKICK, AND SOUND BARRIER

(on some models)

Skip this step if the sound insulation package is not supplied
with the dishwasher.
• Locate the sound insulation package and pre-toekick

packages inside the dishwasher.

• Stand the parts upright as shown.

• Locate the control box.

• Push insulation block portion under the dishwasher until it is

beneath the control box.

• Push the panel portion up to the front of the block.

• Tuck the sides of the front panel behind the toekick

attachment screw holes.

• Open door all the way, if the door doesn’t stay fully open,

adjust the insulation panel.

• On models so equipped, position pre-toekick over the

insulation. Align the screw holes with the screw holes on the
legs of the dishwasher.

Toekick

Panel

(On some

models.)

Insulation

Block

(On some

models.)

Dishwasher

Door

Pre-

Toekick

(On some

models.)

Sound barrier

(On some

models. Part is

already attached

to door.)

Push the sides of the insulation behind

the toekick attachment screw holes

Figure AF

Control Box

Figure AG

Figure AH

• On models so equipped, remove the masking tape from the

sound barrier and door front. Position the sound barrier over
the insulation.

Dishwasher Installation

STEP 23: POSITION INSULATION, PRE-

TOEKICK, AND SOUND BARRIER

(on some models)

Skip this step if the sound insulation package is not supplied

with the dishwasher.

• Locate the sound insulation package and pre-toekick

packages inside the dishwasher.

• Stand the parts upright as shown.

Dishwasher

Door

Toekick

Sound barrier

(On some

models. Part is

Figure AF

already attached

to door.)

• Locate the control box.

Figure AG

• Push insulation block portion under the dishwasher until it is

beneath the control box.

• Push the panel portion up to the front of the block.

Push the sides of the insulation behind

the toekick attachment screw holes

• Tuck the sides of the front panel behind the toekick

attachment screw holes.

• Open door all the way, if the door doesn't stay fully open,

adjust the insulation panel.

• On models so equipped, position pre-toekick over the

insulation. Align the screw holes with the screw holes on the

legs of the dishwasher.

Pre-

Panel

Insulation

(On some

Block

Toekick

models.)

(On some

(On some

models.)

models.)

Control Box

Figure AH

• On models so equipped, remove the masking tape from the

sound barrier and door front. Position the sound barrier over

the insulation.

STEP 24: REPLACE TOEKICK

• Place toekick against the pre-toekick (on some models) and

legs of the dishwasher.

Attachment

Figure AH

• Align the toekick with the bottom edge and make sure it is

• Insert and tighten the 2 toekick attachment screws. The

• When reinstalling the toe kick on models with a sound barrier,

ensure that the bottom edge of the rubberized flap is flush

with the floor. Any excess material should be tucked up

behind the outer door. Do not allow excess rubberized flap to

lay on the floor. If any excess is not tucked completely behind

the outer door, it will bunch up between the door and toe kick

and impede proper opening and closing of the door. This will

be noticeable because the door will not stay fully open and

will spring up.

Tip: Reduce sound from under the dishwasher. Make sure

toekick is against floor.

STEP 25: LITERATURE

• Be sure to leave complete literature package, these

Installation Instructions and product samples and/or coupons

with the consumer.

Sound

Barrier

T o e k i c k

Screws

13

SoldSee similar items$49.35Buy It Now, $9.99 Shipping, 30-Day Returns, eBay Money Back Guarantee

Seller:usapartsandmorellc✉️(8,650)98.5%, Location:Illinois, USA, Ships to: US & many other countries, Item:223074184023WD01X10419 GE Dishwasher tub insulation. Condition:New, Return shipping will be paid by:Buyer, All returns accepted:Returns Accepted, Item must be returned within:30 Days, Refund will be given as:Money back or replacement (buyer's choice), Type:WD01X10419, Brand:GENERAL ELECTRIC COMPANY, Model:WD01X10419, MPN:WD01X10419 GE, Country/Region of Manufacture:United States

People Also Loved PicClick Exclusive