Dream mapper

Dream mapper DEFAULT

DreamMapper

Achieving a great night’s sleep with CPAP therapy happens when you take an active role in your own therapy. That means being in tune with how your therapy and equipment are performing – and how they should be performing – from night to night. DreamMapper is a mobile and web application that keeps you actively informed about your previous night’s therapy – with information like mask fit and therapy hours – so you know you are getting what’s needed for the great night’s sleep you deserve.
DreamMapper provides all of the following:
• Bluetooth® data transfer from your Philips PAP;
• Daily feedback about your treatment and your therapy results;
• Personalize your treatment management by setting alerts and personal goals;
• Find the answers to your questions through a rich content including informational videos and guides;
• Receive notifications about your therapy and your DreamMapper compatible equipment;

Learn more about DreamMapper and the Philips devices it supports at www.dreammapper.com.

Philips CPAP devices treat Obstructive Sleep Apnea (OSA) so that you can sleep better at night and be more active during the day.

Part of the Dream Family
DreamMapper is part of the Dream Family from Philips Respironics. The Dream Family offers innovative, comprehensive sleep therapy technology like:
• DreamWear: It looks different because it is different. The ingenious open-face design provides exceptional comfort with an optimal fit, easy freedom of movement and the ability to choose your most comfortable sleep position. DreamWear is User-friendly in every possible way.
• DreamStation: Embrace your care with confidence with our most innovative obstructive sleep apnea (OSA) technology. With easy-to-navigate menus, remote diagnostics, a sleek, compact profile and incredibly quiet operation, DreamStation helps make it simple to start, customize and continue your OSA therapy.
• DreamStation Go: Whether you’re traveling for business or venturing out on the vacation of a lifetime, DreamStation Go provides an easy, reliable and portable PAP experience for users who refuse to compromise.

Philips DreamMapper has access to the following permissions:

Location
Approximate location (network-based): This is to set up Bluetooth communication. A location is required to acquire the pair.

Photos/Media/Files
Read the contents of your USB storage: This is needed to access the scanned and stored image that the camera takes of the Device Serial Number (DSN).

Storage
Read the contents of your USB storage: This is a way to access the DSN image that might be stored on the SD card (some Androids devices store images to the SD card). This is the default behavior when you ask for the Photo/Media/Files access.

Camera
Take pictures and videos: Used to scan the DSN.

Other reasons
Receive data from Internet: DreamMapper needs to communicate with its Data Center.
View network connections: Wi-Fi setup as well as the need for DreamMapper to communicate with its Data Center.
Pair with Bluetooth devices: First-time connection to another Bluetooth device.
Access Bluetooth settings: First-time connection to another Bluetooth device.
Full network access: DreamMapper needs to communicate with its Data Center.
Prevent device from sleeping: Prevents the phone from “going to sleep” while playing videos.

Sours: https://play.google.com/

Why does DreamMapper need to know my country of residence?

Upon first launch of the mobile app you are required to select your country of residence. This enables DreamMapper to store your data on a server that complies with your country’s privacy laws. If you made the wrong selection, delete the app and reinstall it from the App Store or Google Play. You will be asked the question again.

Can I be removed from mailing list and stop receiving notifications?

Within DreamMapper, click on Settings, and then click on Preferences and click on the Email and/or the Text Message button to turn off notifications.

How is data counted in DreamMapper?

DreamMapper views data from 12 Noon – 12 Noon. For example, you went to bed on April 23rd at 8pm and woke up April 24th at 11am. All of that data would display on April 23rd. April 24th would not start until 12 Noon on April 24th. Data is collected when the CPAP machine detects breathing through the mask.

How do I correct my Login username?

The login username is only a login. We recommend continuing to use the original login. If your email address does change this can be updated in the DreamMapper Settings menu, under Preferences so you will receive any related DreamMapper information at that address.

I have been using my device, why can I only see data from last night?

DreamMapper displays data from the date the account was created and afterward. If you have been using your device but did not sign up until today, you will only see data starting from last night and afterward. At this time, it is not possible to display previous data. Please contact your homecare provider for a report of the previous data

How do I receive data from a modem?

DreamMapper works in conjunction with our homecare provider software called EncoreAnywhere. Your homecare provider must make a connection to your current account with your email address and serial number for your device (13 digit number on the bottom of the device starting with P or J) so you can receive data in DreamMapper. Please contact your homecare provider and request this information be entered into EncoreAnywhere. When this information is entered, the connection is established. If the homecare provider is unsure or has any questions, please ask him or her to contact DreamMapper Support at Philips.

My modem stopped sending data, how do I reset the modem?

A modem in a CPAP device can be reset following these steps:

  • Unplug CPAP machine.
  • Take off modem.
  • Leave modem off for 10 – 15 minutes.
  • Place modem back onto CPAP machine.
  • Plug in CPAP machine.
  • Depress the button on the modem for 10 seconds.
  • Watch the CPAP screen; it should display triangles, then dashes, then a checkmark.
  • When the checkmark or successful message displays, all the data is then synchronized in your DreamMapper account and EncoreAnywhere for your homecare provider.
  • If you see any other symbol besides a checkmark, please contact DreamMapper Support for additional troubleshooting.
  • Refer to the device’s user guide for additional information.

A modem in a DreamStation device can be reset following these steps:
  • Unplug CPAP machine.
  • Take off modem.
  • Leave modem off for 10 – 15 minutes.
  • Place modem back onto CPAP machine.
  • Plug in CPAP machine.
  • Depress the button on Send Receive under the My Provider menu on the device.
  • Watch the CPAP screen. DreamStation will show a Successful or Failed message with a number (in XX – XX format).
  • When the checkmark or successful message displays, all the data is then synchronized in your DreamMapper account and EncoreAnywhere for your homecare provider.
  • If you see any other symbol besides a checkmark, please contact DreamMapper Support for additional troubleshooting.
  • Refer to the device’s user guide for additional information.

When is the modem scheduled to call?

The modem typically calls after stopping therapy. If there is a missed call, the modem may call again during the day when a good signal is detected. If you would like to see your results when you wake up in the morning complete the following steps:

  • Depress the button on the modem for 10 seconds.
  • Watch the CPAP screen, it should display triangles, then dashes, then a checkmark.
  • When the checkmark or successful message displays, all the data is then synchronized in your DreamMapper account and EncoreAnywhere for your homecare provider.
  • If you do not see a checkmark, please contact DreamMapper Support for additional troubleshooting.
  • On the device’s My Provider menu, scroll to Send Receive screen and press the white button to send data.
  • The screen displays a Successful or Failed message with a number (in XX – XX format).
  • If the call fails, please contact DreamMapper Support for additional troubleshooting.

How do I reset the Bluetooth connection?

First, verify that the Bluetooth option is turned on in the DreamMapper Settings menu. Click on the 3 bars on the top left of the app, then click on Settings. On the Settings menu, click on the button next to Use Bluetooth. Scroll down to the bottom of the Bluetooth Setup page and click on Begin Using. The data should begin synchronizing. If the data does not sync and the connection fails, please try the following steps to reconnect the Bluetooth:

  • Unpair the Bluetooth.
  • Uninstall the app.
  • Reboot the phone/tablet.
  • Install the DreamMapper app and go through the setup process selecting Bluetooth.
  • Pair Bluetooth. (Note: Pair means to establish a connection between devices.)
  • On the DreamMapper app Settings menu, Click on Therapy Device, click on Bluetooth, then click on Begin Using.
  • Data should start synchronizing.
  • Click on the Sleep Page to view the latest usage data.

Why does the Data Card Uploader show an “Authentication Failed” message when trying to upload my SD card?

Check the time zone, date, and time settings on your computer. The time and date must reflect the computer’s physical location. If the time zone, date, or time setting is off by more than 10 minutes, the data card uploader will not allow login.

Why does DreamMapper not display AHI or Mask Leak?

Do you have an “A Remstar Plus” model 250 or 260? Those units only have the capability of displaying therapy hours of usage. AHI and Mask leak are not available on this type of device. We recommend contacting your homecare provider or physician and request a machine that provides AHI and Mask Leak data. For additional questions on available data, please contact DreamMapper Support.

Can I install DreamMapper on an iPAD?

Yes. The DreamMapper app is available on all Android and iOS devices. In the App Store, search for DreamMapper under iPhone Only. The app will install and function on iPhone and iPAD.

How do I upload data on my DreamMapper account?

You can upload data 3 ways to a DreamMapper account: SD card, Modem, Bluetooth. Please log in to your DreamMapper account, click on the Settings menu and click on Data Connection. The connections are described with related instructions. For additional questions, please contact DreamMapper Support.

How do I remove DreamMapper data from my mobile device?

Uninstalling the DreamMapper app from your device erases all DreamMapper data. Refer to your device's user guide for instructions on how to uninstall an app.


What is a Hypopnea?

An episode of overly shallow breathing or an abnormally low respiratory rate. Our auto algorithm establishes a baseline of patient flow based on a moving flow signal window. When your device detects a hypopnea as a 40% reduction in flow lasting at least 10 seconds, followed by a recovery breath, then a Hypopnea event is recorded.

What is an Apnea?

An apnea is a pause in breathing, lasting 10 or more seconds.

What is AHI?

The Apnea–Hypopnea Index (AHI) is an index used to indicate the severity of sleep apnea. It is represented by the number of apnea and hypopnea events per hour of sleep. The apneas (pauses in breathing) must last for at least 10 seconds and are associated with a decrease in blood oxygenation. Combining AHI and oxygen desaturation gives an overall sleep apnea severity score that evaluates both number sleep disruptions and degree of oxygen desaturation (low blood level). The AHI is calculated by dividing the number of apnea events by the number of hours of sleep. With AHI, a lower number is better; any number under 5.0 is ideal. Your AHI number displayed in DreamMapper will fluctuate and change every day based on your breathing the night before. The AHI number displayed in DreamMapper will fluctuate and change every day based on your breathing the night before. Your goal is to obtain an AHI as close to 0.0 as possible. Any number under 5.0 is ideal

What is Best Night?

The night with the lowest AHI value since the time of registration.

What is N-Day Average?

The average AHI value based on the displayed window of time. The window on the web app defaults to 14 days but can be changed to 30, 60 or 90 days. The mobile apps display 7 days.

What is Clear Airway Apnea?

An apnea is detected when there is an 80% reduction in airflow from a baseline for at least 10 seconds if there is no airflow detected for 10 seconds. During the apnea, one or more pressure test pulses are delivered by the device. The device evaluates the response of the patient to the test pulse(s) and assesses whether the apnea has occurred while the patient has a clear airway or an obstructed airway. The airway is determined to be clear if the pressure test pulse generates a significant amount of flow; otherwise the airway is determined to be obstructed. When the airway is clear then a Clear Airway Apnea event is recorded.

What is Obstructed Airway Apnea?

An apnea is detected when there is an 80% reduction in airflow from a baseline for at least 10 seconds if there is no airflow detected for 10 seconds. During the apnea, one or more pressure test pulses are delivered by the device. The device evaluates the response of the patient to the test pulse(s) and assesses whether the apnea has occurred while the patient has a clear airway or an obstructed airway. The airway is determined to be clear if the pressure test pulse generates a significant amount of flow; otherwise the airway is determined to be obstructed. When the airway is obstructed then an Obstructed Airway Apnea event is recorded.

How do you interpret the AHI (Apnea Hypopnea Index)?

The AHI measures residual apnea, a number lower than 5 shows that you have been corrected. The lower this number, the better is the correction.

However, if it is higher, it is necessary to try to understand why. There are several reasons for this:

  • Insufficient pressure. In this case, as the settings are determined by your doctor, if you are insufficiently corrected, your doctor's opinion will be essential.
  • Significant leaks. When this occurs, effective pressure is insufficient (see the guidelines concerning mask fit below).
  • Look for external factors that may alter your apnea index and result in ineffective pressure, in particular alcohol intake, the use of sedative drugs, etc.

If the index stays at 15 or is greater than 15, you should contact your doctor again to undergo sleep monitoring with the mask in order to determine the source of the problem.

These indications do not in any way constitute a diagnosis; when in doubt, consult the doctor who is monitoring you for your sleep apnea syndrome.

What is Mask Fit?

Mask Fit is a measurement of how well the mask contacts your face. When the mask is placed perfectly on your face and there are no areas of leak between the cushion and your skin, Mask Fit is 100%. When the mask moves away from your face, leaks result and Mask Fit decreases in value. A higher Mask Fit value is preferred.

What is Best Mask Fit?

The night with the highest Mask Fit value since the time of registration.

What is Total Disconnects?

This is the number of times that the device has detected a mask disconnect.

What is Large Leak Time?

This is the total amount of time that the device detected a large pressure leak.

What is % of Night in Large Leak?

This is the percentage of night that the device detected a large pressure leak.

What is N-Day Average?

The average Mask Fit value based on the displayed window of time. The window on the web app defaults to 14 days but can be changed to 30, 60 or 90 days. The mobile apps display 7 days.

How to interpret the mask fit?

Good positioning of the mask guarantees better treatment efficacy. The better the mask fits your face, the fewer leaks there will be, and the more effective the treatment will be. Note that adjusting does not mean tightening. If leaks persist (adjustment of the mask less than 90%), it is necessary to check to be sure the mask is well adjusted to your face, the straps are not distended, and that you are not assuming a position while sleeping that is capable of shifting the mask.

These indications do not in any way constitute a diagnosis; when in doubt, consult the doctor who is monitoring you for your sleep apnea syndrome.

What is an intentional (or voluntary) leak?

This concerns leaks associated with the mask to evacuate exhalation CO2.

The intentional leak varies depending on the pressure level applied and the type of mask.

It can cause discomfort for the spouse who may feel an air flow.

What is a non-intentional (or unintended, or involuntary) leak?

This involves leaks around the mask that result from a defect in the seal or buccal leaks associated with patient opening his/her mouth during sleep. It is crucial to repair and resolve leakage problems when the leaks are associated with a poor seal of the mask or with buccal leaks. These leaks, if they are significant and regular, may impact the efficacy of treatment and may cause significant discomfort for the patient.

What is a large leak?

Philips CPAPs tolerate up to twice the intentional leaks. They compensate for this leak by adjusting the speed of the blower. Beyond the tolerance threshold, the DreamStation indicates that its detection is not reliable in terms of the increased level of non-intentional leaks. It then qualifies these leaks as large.


What is Usage?

Usage is measured in hours and it represents the amount of time you use the device.

What is a Day?

As most people sleep across the threshold of midnight, any Philips Respironics device usage from yesterday at noon to today at noon is summarized as yesterday's data.

What is Compliance?

DreamMapper is a personal coaching tool. It is not used by any insurance provider or regulatory body to monitor or substantiate device usage. Your homecare provider is responsible for gathering compliance data, etc.

What is Minimum Pressure?

The amount of minimum pressure preset on your device.

What is Maximum Pressure?

The amount of maximum pressure preset on your device.

What is cmH2O?

Centimeters of water is a unit of measure used to measure the amount of pressure produced by CPAP devices.

What is Device Mode?

Specifies the type of therapy being delivered. The modes are dependent on the type of device and dictate how the therapy is delivered to you.

What is Ramp?

Ramp allows you to start treatment at a lower pressure to facilitate falling asleep, then gradually raises the pressure over a preset time.

What is Ramp Time?

The duration of time set for the ramp. Ramp Time can be set from 0 to 45 minutes on most CPAP machines.

What is Ramp Start Pressure?

The amount of pressure at which the Ramp feature begins.

What is Best Usage?

The night with the highest amount of Usage since the time of registration.

What is N-Day Average?

The average amount of Usage based on the displayed window of time. The window on the web app defaults to 14 days but can be changed to 30, 60 or 90 days. The mobile apps display 7 days.

What is CPAP Pressure?

On a fixed-pressure device the CPAP Pressure is the setting of pressure measured in cm H2O which your device is currently set at if it is in CPAP mode. This means once the machine has ramped up it will continue to blow out at a fixed pressure (Ex: 12 cm H2O) during the entire course of the session.

What is Average 90% Pressure?

The average pressure measured in cm H2O at which you spent 90% of your time on for that day. This is relevant when your device is an Auto-CPAP. During any given night, the device recognizes the 90% Pressure achieved by the Auto Algorithm. 90% Pressure is defined as the pressure at which the device spent 90% of the session time at or below. For example, if the device recognized airflow for 10 hours, and 9 hours were spent at or below 11 cm H2O, and 1 hour was spent above 11 cm H2O, then the 90% Pressure would be 11 cm H2O.

What is IPAP?

IPAP (Inspiratory Positive Airway Pressure) is found on Bi-level devices, and is the pressure setting used for inspiratory breaths measured in cm H2O.

What is EPAP?

EPAP (Expiratory Positive Airway Pressure) is found on Bi-level devices, and is the pressure setting used for expiratory breaths measured in cm H2O.

What is Min EPAP?

Min EPAP is used in an auto-bi-level or ASV device, and is the minimum Expiratory Positive Airway Pressure setting which the device is set to use. It is measured in cm H2O.

What is Max IPAP?

Max IPAP is used in an auto-bi-level or ASV device, and is the maximum Inspiratory Positive Airway Pressure setting which the device is set to use. It is measured in cm H2O.

What is Pressure Support?

On Auto-Bi-Level or ASV devices a pressure support is used to tell the machine the difference between IPAP and EPAP. This setting has minimum and maximum values.

How should usage be interpreted?

The more you use your treatment on a regular basis, the more you will benefit.

If your use is less than 4 hours per night, your device will not participate in the prevention of cardiovascular diseases.

If the reasons are temporary, in particular, in case of temporary common cold or sinusitis, you can benefit again from a satisfactory usage at the end of this transitory period.

However, if this situation recurs every night, it is necessary to try to understand its causes. You can decline (consciously or unconsciously) to wear the device. First try to resolve the potential technical or discomfort issues: train yourself to fit your mask on and off, search for the best position possible. If possible, get help from someone around you: talk about your difficulties and do not hesitate to show him/her how you put on the mask. If, despite your efforts, you do not get the expected results, contact your doctor again so that he/she can advise you.

These indications do not in any way constitute a diagnosis; when in doubt, consult the doctor who is monitoring you for your sleep apnea syndrome.

Privacy Notice

DreamMapper v 2.28.1.1 © Koninklijke Philips N.V., 2004-2021 All rights reserved.

Sours: https://www.mysleepmapper.com/Help/Faq
  1. Silverado resort cottages
  2. Impress pedicure
  3. Wainscoting panel width
  4. Mosaic desk lamp
  5. 66 nova restomod

What is the DreamMapper?

CPAP therapy can help you have a good night's sleep and help energy and cognitive function during the day. But sticking to CPAP therapy can be challenging. The DreamMapper sleep apnea app is for Philips Respironics System One and DreamStation family machines designed to help you stay motivated to stay compliant with your therapy.

Things you can do with the DreamMapper app

  1. Get feedback on your therapy and progress daily

    DreamMapper will let you know how your night of sleep went and how your therapy is progressing. It also offers suggestions on how to get back on track if your results aren't desireable.

  2. Set custom trackable goals
  3. To help stay motivated, you can use pre-set goals or create custom goals to give you something to work toward. DreamMapper will automatially track your progress and reward you when you hit your goals.

  4. Get advice and reminders
  5. You will have access to educational videos and materials to help you get used to new masks and new machines. The DreamMapper app will also give you custom tips on maintaining and cleaning your equipment.


DreamMapper is easy to get started

  1. Create your account
  2. Make sure to have your DreamStation or DreamStation Go serial number handy

  3. Download the app
  4. On your computer just visit My DreamMapper.com

  5. Connect your DreamStation

    Use the Bluetooth module attached to your DreamStation or DreamStation Go to connect wirelessly via your computer or mobile devies's Bluetooth settings.


Compatible machines for the DreamMapper app

    System One Machines

  • System One
  • System One REMstar Plus C-Flex
  • System One REMstar Pro C-Flex
  • System One REMstar Pro C-Flex+
  • System One REMstar Auto A-Flex
  • System One BiPAP Pro Bi-Flex
  • System One BiPAP Auto Bi-Flex
  • System One BiPAP AutoSV Advanced

Sours: https://www.1800cpap.com/what-is-dreammapper
All New DreamStation 2 Auto CPAP - Review and Demo

iPhone Screenshots

Description

Achieving a great night’s sleep with CPAP therapy happens when you take an active role in your own therapy. That means being in tune with how your therapy and equipment are performing – and how they should be performing – from night to night. DreamMapper is a mobile and web application that keeps you actively informed about your previous night’s therapy – with information like mask fit and therapy hours – so you know you are getting what’s needed for the great night’s sleep you deserve.

DreamMapper provides all of the following:
• Bluetooth® data transfer from your Philips PAP;
• Daily feedback about your treatment and your therapy results;
• Personalize your treatment management by setting alerts and personal goals;
• Find the answers to your questions through a rich content including informational videos and guides;
• Receive notifications about your therapy and your DreamMapper compatible equipment;

Learn more about DreamMapper and the Philips devices it supports at www.dreammapper.com.

Philips CPAP devices treat Obstructive Sleep Apnea (OSA) so that you can sleep better at night and be more active during the day.

Part of the Dream Family
DreamMapper is part of the Dream Family from Philips Respironics. The Dream Family offers innovative, comprehensive sleep therapy technology like:
• DreamWear: It looks different because it is different. The ingenious open-face design provides exceptional comfort with an optimal fit, easy freedom of movement and the ability to choose your most comfortable sleep position. DreamWear is User-friendly in every possible way.
• DreamStation: Embrace your care with confidence with our most innovative obstructive sleep apnea (OSA) technology. With easy-to-navigate menus, remote diagnostics, a sleek, compact profile and incredibly quiet operation, DreamStation helps make it simple to start, customize and continue your OSA therapy.
• DreamStation Go: Whether you’re traveling for business or venturing out on the vacation of a lifetime, DreamStation Go provides an easy, reliable and portable PAP experience for users who refuse to compromise.

Philips DreamMapper has access to the following permissions:

Location
Approximate location (network-based): This is to set up Bluetooth communication. A location is required to acquire the pair.

Photos/Media/Files
Read the contents of your USB storage: This is needed to access the scanned and stored image that the camera takes of the Device Serial Number (DSN).

Camera
Take pictures and videos: Used to scan the DSN.

Other reasons
Receive data from Internet: DreamMapper needs to communicate with its Data Center.
View network connections: Wi-Fi setup as well as the need for DreamMapper to communicate with its Data Center.
Pair with Bluetooth devices: First-time connection to another Bluetooth device.
Access Bluetooth settings: First-time connection to another Bluetooth device.
Full network access: DreamMapper needs to communicate with its Data Center.
Prevent device from sleeping: Prevents the phone from “going to sleep” while playing videos.

Version 2.28.1

DreamMapper is making it easier to identify your device serial number by upgrading our scanning capability. We continue to expand our ability to communicate with you by translating DreamMapper into Greek, Hungarian, Slovenian, and Norwegian.  Then, in our quest to improve our app, we have made some defect corrections and performance updates.

Ratings and Reviews

4.6 out of 5

92.5K Ratings

I have learned to love it

When I first got the app, I struggled to Bluetooth connect to my CPAP machine. It must have been a learning curve, because now it uploads automatically every morning. As soon as I turn my machine off, I literally just tap the DreamMapper app to open it, and syncing is automatic.
It is a little quirky if you try to "do the most" in connecting your Bluetooth. This is the only Bluetooth device that once connected will display the CPAP as both a connected and a connectable device (listed twice, which creates confusion, and difficulty if you try to "fix" this. Just connect once, and open the app daily and it will auto sync.
The app gives you: Sleep hours, apneas, hypopneas, and is searchable by week with bar graphs, comparing your nights. There are helpful videos, goals, and product suggestions, which is nice to know about certain things, like the new portable CPAP for hiking, and things like that.
Love it or hate it, I've learned to love this app and accept my sleep apnea. I've learned how to use it, and it is a super-easy component to my morning, which I believe it was programmed to auto-grab data every morning off the cpap. Just make sure the cpap is on (i.e. You just turned off the air) then open DreamMapper

🎵 Ba, ba, ba, ba baaa🎵 I’m Lov’n it🔚

It took me a few hours to the day to understand the app. It has been working very well for me and I had no issues of downloading the app and blue-toothing to my phone. I guess I am one of the lucky ones. I love that it shows the AHI, the hours of sleep time, and the mask fit. I also like the bar chart as well because it gives a perspective on my days of sleep. I also look at it online where I can see the whole picture better. Online DteamMapper gives a 14,30,60,90 days in which when you click on any of these numbers you can see the bar chart of Udage, AHI, and Mask Fit. It’s pretty cool. My Phillips DreamStation also comes with an SD card in which I can load into my computer all the data.

One suggestion / recommendation I would like to see added to the DreamMapper is a tab that reads “months” and have it at the top in the menu bar. And then when you click on it a drop down window appears with all 12 months listed. This way you can select your month and click on the 30 day and see your data for that month and compare it to other months; oppose to using the arrows on each side to view past or future months .

Vet nice app🔚👍🏻.

A Necessary Tool for the Phillips CPAP

I have found the Phillips Dreamware app to be a necessary diagnostic tool for helping me understand the quality of my sleep each night. I have been using it for many months now. The application indicates how long you wore the mask, the effectiveness of the seal it had with your face, and the overall AHI sleep index with a breakdown for the number of occurrences of obstructive apnea, clear airway apnea, and hypopnea during the sleep period. You can also generate column chart graphs for up to 90 days that show how long the mask was worn, the effectiveness of the seal, and the overall AHI index for each sleep period during the chosen span of days. Note: the breakdown of the AHI index is only shown for each sleep period. The only bug I have observed with the app is when it pops up an error message saying it failed to connect via Bluetooth, and yet when you click "OK" the data usually transfers despite the error warning (false error). One nice additional feature would be to download the sleep data as a CSV or tab delimited file so that you can better look at the raw data in Excel or some other spreadsheet tool of choice (for those who are more analytically minded).

The developer, Philips Respironics, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy.

Data Linked to You

The following data may be collected and linked to your identity:

  • Health & Fitness
  • Contact Info
  • Sensitive Info

Data Not Linked to You

The following data may be collected but it is not linked to your identity:

Privacy practices may vary, for example, based on the features you use or your age. Learn More

Information

Seller
Respironics, Inc.

Size
52.3 MB

Category
Medical

Compatibility
iPhone
Requires iOS 10.0 or later.
iPod touch
Requires iOS 10.0 or later.
Languages

English, Czech, Danish, Dutch, Estonian, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian Bokmål, Polish, Portuguese, Romanian, Simplified Chinese, Slovak, Slovenian, Spanish, Swedish, Traditional Chinese, Turkish

Age Rating
4+

Copyright
© 2021 Koninklijke Philips N.V. All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright holder.

Price
Free

Supports

  • Family Sharing

    With Family Sharing set up, up to six family members can use this app.

You Might Also Like

Sours: https://apps.apple.com/us/app/dreammapper/id530569351

Mapper dream

By clicking on the link, you will be leaving the official Royal Philips Healthcare ("Philips") website. Any links to third-party websites that may appear on this site are provided only for your convenience and in no way represent any affiliation or endorsement of the information provided on those linked websites. Philips makes no representations or warranties of any kind with regard to any third-party websites or the information contained therein.

I understand

Back to top

By clicking on the link, you will be leaving the official Royal Philips Healthcare ("Philips") website. Any links to third-party websites that may appear on this site are provided only for your convenience and in no way represent any affiliation or endorsement of the information provided on those linked websites. Philips makes no representations or warranties of any kind with regard to any third-party websites or the information contained therein.

I understand

Back to top

Our site can best be viewed with the latest version of Microsoft Edge, Google Chrome or Firefox.

Sours: https://www.usa.philips.com/c-e/hs/sleep-apnea-therapy/dreammapper.html
Philips Respironics Dreamstation Tutorial / Review Part 1 of 3 - Basic Setup

And asked what can I eat. She told him, youll find something in the fridge and take it. (By the way. There were no parents, Vikina and Katina Rodoki, they went to mine very well were friends. ) Brother left, and a few minutes later came in with friends.

Similar news:

As events are recalled, I write based on my memory and thoughts at the moment. Our wedding with Dima was approaching. There was a lot of running around, but Dimin's friend helped us in organizing this event.



199 200 201 202 203