Honeywell siren

Honeywell siren DEFAULT

Honeywell Home PROSIXSIREN ProSeries Wireless Indoor Siren


The Honeywell Home PROSIXSIREN ProSeries Wireless Indoor Siren is designed for the ProSeries Alarm System and using 128-bit AES encryption. The PROSIXSIREN signals unauthorized entrance into a home or business and can be installed in any indoor location without the need to run wires.

PROSIX Series is the next generation wireless technology for security and the connected home. With its innovative technology and superior performance, PROSIX Series enables faster installation, easier troubleshooting and remote diagnostics. Its encrypted transmission ensures the highest level of data security.

Compatible with the Resideo ProSeries platform, PROSIX Series technology is available in a broad selection of devices for intrusion, life safety, property protection, as well as in wearables, giving users immediate and convenient access to important system functions.


Secure Encryption

• Employs 128-bit AES encryption for a high level of security


• Helps prevent competitive account takeovers and conversions as SiX devices, when enabled devices, are locked into panels and must be unpaired by the installer to be used again

Simple Installation

• Speed installation and eliminate errors with sensor’s battery pull-tab, auto-enrollment and no-touch adjustment.

Remote Diagnostics

• Use System Health Check to proactively troubleshoot by monitoring device signal strength, sensor settings, and battery life anytime, anywhere

Fewer Service Calls

• Reduces service calls with user-replaceable batteries and the ability to remotely adjust sensor parameters and download software updates

*Some Features are only available to your dealer and not the end-user


Mounting Hardware – Included

LED Indicators – Yes

Sound Pattern – 360 degrees

Tamper Protected – Yes

Power Requirements – AA Energizer™ Lithium (Qty 4)

Transmission Range – 300 ft (92 meters) plus*

Frequency – 2.4 GHz

Encryption – 128-bit AES

Battery Life – Five years (typical use)

Operating Temperature – 32° F to 122° F/0° C to 50° C

Relative Humidity – 5-95%, non-condensing

Dimensions – 5.5″ diameter x 1.8″ depth/ 140mm diameter x 46mm depth

Approval Listings – FCC/IC, ETL Listed to UL 985 and UL 1023, cETL Listed to ULC-S545 and ULC/ORD-C1023

Authorized Countries – US/Canada/Latin America

*Varies based on each installation due to environmental conditions.

Click here for more Honeywell Products


SIRENKIT-OD - Resideo Honeywell Home Outdoor Siren Kit (for LYNX-Series Control Panels)

SIRENKIT-OD - Resideo Honeywell Home Outdoor Siren Kit (for LYNX-Series Control Panels)

The Honeywell SIRENKIT-OD is a outdoor siren kit designed by GeoArm. A common question that we receive about the Honeywell LYNX Touch series wireless control panels (L5200/L5210/L7000), is if they can use an external hardwired siren? The answer to that question is no by default. The Honeywell LYNX Touch L5200/L5210/L7000 wireless panel do have the option for an output, but the output is not enough to power one of the powered external hardwired sirens.

But, here at GeoArm we have a solution to that problem. In order to have a successful installation of a powered external hardwired siren you will need a few parts. All of these parts we have combined to form a GeoArm kit, the part number for this kit is SIRENKIT-OD. In this kit you will receive one housing box, one power supply, one AC transformer, one sensitive relay, an im 1240 backup battery, and one Honeywell 702 outdoor siren. You don't have to use the Honeywell 702 if you don't want just make sure that siren you use does not exceed 1.2 amps "as this is the maximum power output of this additional power supply". The Honeywell L5200/L5210/L7000 wireless panels need a sensitive relay as well, because the panels have a current limit of 3ma. Please check out our wiring diagram.

Once you have completed wiring up your Honeywell LYNX Touch L5200/L5210/L7000 panel along with the SIRENKIT-OD powered external hardwired kit you will need to apply a rule to your system. To do this go to security, more, tools, installer code "default is 4112", rules, highlight rule, edit, type trigger output, action permanent, start system operation any burglar alarm, stop system operation bell timeout, save, back out to the home screen, then insert the UltraTech IM-1250F1 and power up the SIRENKIT-OD. After you have completed these steps go ahead and test your Honeywell L5200/L5210/L7000 with a powered external hardwired siren.

• L5200
• L5210
• L7000

Product Reviews

Other customers rated this item:
5 out of 5 stars

WRITE A REVIEW(Reviews are subject to approval)

  SIRENKIT-OD - Honeywell Outdoor Siren Kit, May 17, 2017
Posted By: JAson Stienburg
7 people found this review helpful

I purchased a Honeywell L5210 with accessories. After the install I noticed that my alarm siren were not as loud as i would like them to be from the outside, so I called Geoarm and they sold me the SIRENKIT-OD - Honeywell Outdoor Siren Kit. WOW what a difference, not my hold block knows if someone breaks in my house!!!!! Get suggestion Justina!!!!!

Was this rating helpful to you?   Yes   No

Q & A's : Honeywell SIRENKIT-OD Outdoor Siren Kit (for LYNX-Series Control Panels)

comments powered by

id:honeywell-outdoor-siren-kit-for-honeywell-lynx-series-control-panels|image:|name:SIRENKIT-OD - Resideo Honeywell Home Outdoor Siren Kit (for LYNX-Series Control Panels)|price:119.76|rating:5|brand:Honeywell Home|frequency:Honeywell 345 MHz|installation:PRO Install|wired-zones:|wireless-zones:|color:|compatible:|network:|resolution:

  1. Feeding copepods
  2. First nbme score
  3. Stubby auger bits

The Siren is not sounding the alarm when the keypad alarm is triggered in the home. The LED indicators on the Siren are flashing, so I know that there is still battery power. What could be wrong?

The Siren could be in Service mode.

  1. Check to see if the Siren is in Service mode. First, enter Test mode on the keypad by pressing the disarm button on the keypad, followed by swiping a contactless tag or entering your PIN code. The keypad will respond by playing a melody.


  2. Now press the number 8 on the Keypad. If the Siren does not respond, it means that it is still in Service mode.


  3. Now press number 9 on the Keypad. The siren will produce 1 long beep followed by 2 short beeps to confirm that it is now in Operating mode. Press the disarm button again on the keypad to exit Test mode. The keypad will play a melody once again to confirm.



If the above does not work, the Siren has not been linked to the Keypad.

  1. Remove the battery cover on the rear of the Siren and locate the row of dip switches. Ensure that dip switch 5 is set to the OFF position as shown in the diagram.


  2. Enter Programming mode by pressing the Programme button followed by swiping a contactless tag or entering your PIN code. The keypad will play a melody to indicate success.


  3. Locate the Learn button on the back of the Siren as shown in the diagram. Press and hold the Learn button for 5 seconds until the Siren emits a short beep and the indicator LEDs start flashing.


  4. Within 30 seconds, press the ‘Arm’ button on the keypad. The Siren will produce 2 short beeps to confirm that it is now linked to the Keypad.


  5. Press the Programme button on the keypad once more to exit Programming mode. The keypad will play a melody to indicate success.


The battery siren does not appear to be working - Alarms - Honeywell Home


The Honeywell Indoor/Outdoor 30 Watt 118db Siren is a siren and speaker in one that has two sound options(warble or steady). The wires are all enclosed to prevent easy tampering. You could also add a plunger switch to the siren if you wanted an alarm to sound if someone tries to remove it. When 12V are used, this siren has been capable of reaching 118dB.

The Honeywell Indoor/Outdoor 30 Watt 118db Siren is made of high impact plastic material and you can use it indoors or outdoors.


  • 6 to 12 volt DC combination speaker and siren driver
  • Dual tone – warble or steady
  • Enclosed wires to prevent easy tampering
  • 30 watt power rating
  • Indoor/outdoor


Honeywell Indoor/Outdoor 30 Watt 118db Siren Specifications:
  • db Output: 110dB
  • Current Draw: 1500mA with 12V and 400mA with 6V
  • Operating Voltage: 6-14VDC
  • Power: 30 watt
  • Indoor/Outdoor: Both
  • Residential/ Commercial: Both
  • Dual Tone: Yes
  • Tamper: No (but you can add one)

Siren honeywell

" he looked at me inquiringly, We are all Seryozha. Enough, "I replied coldly. " Okay.

Honeywell/Ademco Wave 2 unboxing and test

While the girl was serving me breakfast, Zhenya turned to me: If I did something wrong, tell me. It seems like everything happened yesterday, so I was sure that it was possible to give it to her mouth, and your girlfriend is just a miracle, how can you restrain. Yourself.

Similar news:

Maybe you'll save up supplies for the wives. - Wives will get theirs, and we will part with you for a long time. - There will be a desire, come in. - But really, let's get together sometimes, there is something to remember.

430 431 432 433 434