General finishes toner

General finishes toner DEFAULT

General Finishes Waterborne Stains, Dyes, Coatings

ENDURO Water Base SANDING SEALER
Click Above for Data & Application Information
ENDURO Waterborne SANDING SEALER

Enduro Waterborne Sanding Sealer is a clear undercoat
that forms an easily sandable foundation for any interior finish.
Use under all Enduro topcoats, to provide improved water
and chemical resistance.  The high solids content builds a fast film.
Dries tack free in 10-20 minutes.

Water CLEAR
Brushable or Sprayable
Coverage: Quart, 150 Sq. Ft. -- Gallon, 600 Sq. Ft.

HIGH PERFORMANCE Waterborne Interior Polyurethane Topcoat
Click Above for Data & Application Information
HIGH-PERFORMANCEInterior Top Coat

"High-Performance™ Interior Top Coat was voted as the hardest,
most durable consumer polyurethane top coat."

Winner of Fine Woodworking's 'Best Overall' Choice Award.

Application: Brush, Roller, or Spray

High-Performance Top Coat contains a UV Stabilizer to retard finish breakdown in sunlight.
With its pure polyurethane durability, this is a most durable product.

Color: Water White (Dries CLEAR).
Note: Water topcoats can pull tannin, stains, and dyes from surfaces that are not properly prepared.

FLAT OUT FLAT
Click Above forUsage & Application information
FLAT OUT FLAT
FLAT OUT FLAT  Water Based Topcoat

Flat Out Flat is a self-crosslinking water-based topcoat
that mimics the lustrous look and feel of wax.
The increased matting agents used to create "flatt look" cause this wood finish
to have less clarity and show fingerprints more (especially over Dark finishes).
With slightly less durability than High Performance, it is recommended
for low-use items or projects other than kitchen cabinets and table tops.

ENDURO-VAR Water Borne Urethane Varnish
Click Above for Data & Application Information
ENDURO-VAR Urethane Varnish
Enduro-Var Urethane VarnishGENERAL FINISHES Enduro-Var is a self cross-linking polyurethane
that looks more like an oil varnish than a water coating.

Enduro-Var is durable is a sprayable and brushable slightly amber varnish
suitable for INTERIOR residential projects such as cabinets and millwork.

Enduro-Var ADHERES WELL only over Water Stains, Water Dyes and Raw Wood.
Use Enduro-Var over other surfaces at your own risk. It will adhere over an oil
stain, ONLY IF the stain is completely dry (minimum 4 days drying).

Available Sheens:
Gloss, Semi-Gloss, Satin, and Flatt - Application: BRUSH, ROLL or SPRAY
---------
Note: For High-Use Surfaces General Finishes High Performance Topcoat, Enduro Clear Poly,
Arm-R-Seal Topcoat
are recommended on high-use surfaces such as kitchen tabletops, kitchen cabinets
or bath vanities as they have greater water and chemical resistance than Enduro-Var Urethane Varnish.

Enduro EXTENDER, Hot Weather Additive
Click Above for Data & Application Information
Water Base EXTENDER / Retarder (The Hot Weather Additive)


General Finishes Enduro Extender (retarder) is a wetting additive
used to slow & increase the drying time of any water based stain, topcoat or glaze.

This additive is extremely helpful in managing too rapid drying
of waterborne finishing materials in very warm, dry or drafty conditions.

Interior & Exterior (can be mixed into any water base product)

Helps eliminate over-spray and ensure a smooth finish film.
Extender allows more working time and helps penetration for better adhesion in hot weather.

Available sizes:  Pint Bottle (16 Oz.), 4 Ounce, Gallon

Enduro ACCELERATOR
Click Above for Data & Application Information
Enduro ACCELERATOR
for waterborne finishes
Accelerator

 

General Finishes Enduro Accelerator is an additive
that shortens the dry time for water base wood finishes.

Use to accelerate drying of waterborne finishes
in cool, humid and damp conditions.


Available:

PINT (16 Oz) Bottle, and Gallon

General Finishes Water Based DYE Stains
Click Above for Data & Application Information
Water Based DYES
General Finishes DYE Stains penetrate deep into the wood to magnify the grain beautifully.
Water Based DYES provide more depth and color vibrancy than any stain.

DYES are excellent for highly figured woods like mahogany, walnut, or maple.
Dye stains can also be used as a toner when mixed into Water Based Topcoats.

Interior applications only.  Available: Pints, Quarts, Gallons

DYE Colors:
(New Color) Pewter,  Amber,  Light Brown,  Medium Brown,  Dark Brown,  Cinnamon,  Vintage Cherry,
Merlot (dark wine red),  Empire Red,  Yellow,  Orange,  Blue,  Green,  Ebony,  Reducer - DO NOT Add Water.
To maintain the DYE working characteristics, use the dye REDUCER to extend or lighten the color.

General Finishes Water Based WOOD STAINS
Click Above for Data & Application Information
Water Based Pigmented Wiping WOOD STAINS

GENERAL FINISHES Water Based Wood Stains have all the
advantages of oil based stains: they spread easily, can be repaired,
blend effortlessly and have plenty of open working time.
The thicker formula allows controlled penetration, which will reduce blotching
on softer woods such as Aspen, Pine, and Soft Maples.

• For Interior applications Only.   • Apply by brush or spray.
     Available: Pints, Quarts, (& on order Gallons)

Colors:
White Wash,  Natural,  Country Pine,  Golden Oak,  Antique Oak,  Pecan,  Shaker Maple,
Early American,  Antique Cherry,  Black Cherry,  Rosewood,  Walnut,  Brown Mahogany,  Espresso
Not Pictured:Weathered Gray,  Black


Sours: https://www.shellac.net/general-finishes-waterborne-stains-dyes-coatings.html

February 7, 202100

Liquid stains will soak into the wood more than gel stains, so … Having trouble deciding what color to choose when staining? General Finishes has a great tutorial on how to create a custom oil based tinted toner with oil based top coat. Learn an easy way to UPDATE KITCHEN CABINETS AND WOODWORK by mixing and applying a custom toner. Tinted wood finishes add sheer, nearly transparent color allowing the most wood grain and texture to show through. Clear finishes protect and beautify the wood. Toner is a mix of topcoat and stain. Dye stains can also be used as a toner when mixed with Water Based Topcoats. General Finishes Water Based Dye Stain is a ready-to-use, water based formulation designed to penetrate deep into wood to magnify the grain beautifully and produce more depth and color vibrancy than any other stain. A wood toner is simply pigment, mixed into a "watered down", clear finish. GENERAL FINISHES WATER BASED WOOD STAIN: Black Cherry; GENERAL FINISHES HIGH PERFORMANCE TOPCOAT: Satin; Toner is a mix of topcoat and stain. Workshop of Spring Hill, KS created this cool look with burnt edges and GF Green Dye Stain. All of our stains can be used: Stock base colors of RTM, Water-Based Wood Stains or Dye stains. Hope that helps – good luck! Toning is the process of adding colorant, either dye or pigmented stain into a top coat and then applying over an entire piece in order to subtly deepen the color. More, America's Leading Manufacturer of Innovative Water-Based Wood Finishes, Manufacturer Account Custom Coatings Registration Form, COMPARE Paints, Glazes & Pigmented Topcoats, COMPARE Primers, Sanding Sealers & Undercoats, Water Based Paints, Glazes and Pigmented Top Coats, Enduro Ready to Match (RTM) Water Based Stain, Fill Sticks -NEW Assortment Pack of 15 Color Groups, Touch Up Markers - NEW Assortment Pack of 15 Color Groups, Water Based Paints, Pearl Effects & Glazes, High Performance Polyurethane Water Based Topcoat, Fill Stick and Touch Up Marker Assortment Pack, How to Darken an Existing Finish by Toning, http://bit.ly/VideoGFDarkenFinishByToning, http://bit.ly/VideoGFUpdateCabinetsByToning. All of General Finishes water-based topcoats with the exception of Conversion Vanish can be tinted to create lightly colored finishes for toning. General Finishes Water Based Dye Stains' deep rich tones enhance the wood grain and produce vibrant colours especially woods like cherry, walnut and maple. Apply to cabinets, millwork, or any other wood project. Free delivery with $45 order. Layer the color to get the look you want. The far left is bare wood and the far right is 5 coats of toner. Apply to cabinets, millwork, or any other wood … But that's not to say it can't be done. If you are starting with a light honey tone door and you want to create an Espresso color this will take multiple coats of color including base coat of stain followed by several toning coats. Phone-714-633-4171 Phone-714-633-4171 . This product is excellent for highly figured woods like mahogany, walnut or maple. America's leading manufacturer of innovative water-based finishes. They will provide your project with more depth and color vibrancy than any other stain. Layer the color to get the look you want. Can be applied with a brush, or spray applicator. Review our opacity scale to determine your perfect balance of color and protection. You can also tone with Gel Stains - see these videos: There are limits anytime you add pigments or dyes to water-based topcoats. Wood finishing is really not difficult or complex when you break down the components. This product is excellent for highly figured woods like mahogany, walnut, or maple. General Finishes Oil Base Liquid Wood Stains COLORS: 15 SIZES: 1/2 Pints, Quarts General Finishes Liquid Oil Base Wood Stains are a high-quality stain designed to add depth and richness to wood. General Finishes dyes are ready to use, water based formulations designed to give you deep, rich colors without raising the wood grain. The latter is called a “tinting toner.” It “hides” the wood and blocks out its natural look in the same way paint does. It is YOUR RESPONSIBILITY TO TEST to your satisfaction before application to your entire project. There are four basic techniques to the art: Colored wood toners, stains, glazes and shading stains. Used throughout the industry for quick efficient professional touch-up. Reply. Toner can be applied with a high quality brush. They will provide your project with more depth and color vibrancy than any other wood stain. Water Based Dye Stains penetrate deep into the wood to magnify the grain beautifully. Excess amounts of colorant can create surface defects and decrease the viscosity (causing drips, sag, etc.). Available in a wide variety of wood finishing shades. Our Location. Adapts to various methods so as to blend in spot repairs. And for 28 years General Finishes has devoted itself to engineering the best water-based stains and finishes available. General Finishes Wood Dye is superb for highly figured woods like mahogany, walnut or maple. Dye tinting toner stains are transparent. These easy to use dyes can be used straight out of the can, or can be diluted with the Neutral Base or water or intermixed with General's other water based stains and finishes to create a full palette of colors and tones. Learn an easy way to UPDATE KITCHEN CABINETS AND WOODWORK by mixing and applying a custom toner. These waterbourne Dyes can also be used as a toner when mixed with water-base topcoats. General Finishes focuses on state of the art water-base finishes and waterbourne coatings, and is the country's leader in waterbased finish technology offering wood stains, dye stains, top coats, gel stains, exterior wood finishes, liquid oilbase stains, water based lacquers furniture paint. As a major distributor of General Finishes water-based paint and stains, Wood Repair Products carries one of the largest inventories of General Finishes in Orange County. Mohawk Ultra Classic & Behlen Master Toners may also be used as a topcoat. It can be used to subtly deepen… A good rule to follow when tinting is starting with a minimal amount of stain or dye, 5-10% by volume. Jun 29, 2020 - Unique, waterbased, ultra-penetrating stains designed to work like solvent-based stains - from General Finishes, www.GeneralFinishes.com. Wood Toned & Clear Stain. Always test color first and strain material through a fine mesh filter to remove any undissolved particle of pigment. Toning should always be done in small increments to achieve the desired color. Set your store to see local availability Add to Cart. Application. Mohawk Tone Finish Toner. Once I was happy with how it looked, I mixed up a wood toner and applied that to even things out. Speaker 1: Just because you put a first coat of finish on wood, it doesn't mean it's Last Chance Gulch for adding color. In fact, most commercial furniture finishes are colored in layers. March 22, 2015 at 4:59 pm. (I say the term "watered-down", but if you decided to use an oil-based finish, make sure to use mineral spirits, or lacquer thinner.) As a finishing PROFESSIONAL, look no further for fine water-based, eco-friendly furniture finishes, dyes, chalk style paints, wood stains, cabinet finishes and superior green wood coating products. Staining wood is not the only way to add color to a finish. Choose top quality General Finishes Wood Dye with us. Compare ... General Finishes 1 qt. Finely ground, non-fading pigments for color repairs that last. Take 6 and a half minutes and follow these 6 steps from General Finishes to get started.1. More, Manufacturer Account Custom Coatings Registration Form, COMPARE Paints, Glazes & Pigmented Topcoats, COMPARE Primers, Sanding Sealers & Undercoats, Water Based Paints, Glazes and Pigmented Top Coats, Enduro Ready to Match (RTM) Water Based Stain, Fill Sticks -NEW Assortment Pack of 15 Color Groups, Touch Up Markers - NEW Assortment Pack of 15 Color Groups, Water Based Paints, Pearl Effects & Glazes, High Performance Polyurethane Water Based Topcoat, Fill Stick and Touch Up Marker Assortment Pack. This technique can also be known as creating a finish toner or finishing toner. Some colors work better than others. Apply to cabinets, millwork, or any other wood project. General finishes dye stains allows us to mimic the skies of the great Alaskan North in an amazing way. The clarity of these Dye based Toners will not obscure the figure or grain of the wood. Instructions General Finishes Dye I made the sample below by spraying multiple coats of a "walnut" colored dye toner over maple. 616 N. Eckhoff Orange,CA 92868 . It can be used to subtly deepen or freshen up the color of a wood finish. If you are new to toning, we recommend starting with Dyes stains, which can be easier to use as they only contain dyes and no pigments. Adding glaze or toner to a project is a decent way to alter the color of your finish if you don't mind obscuring your wood grain or a bit of challenge in application. It can be used to subtly deepen or freshen up the color of a wood finish. It is impossible to achieve a radical change in color in coat application. [email protected] [email protected]odrepairproducts.com The General Finishes WB dye stains are a great product but take some getting accustomed to if you’ve been used to using the Transtint dyes (as I had for years). Carbon Gray Oil-Based Interior Wood Gel Stain Model# GF.CQT $ 39 59 $ 39 59. Clear Outdoor Wood Oil Model# GF.QTOC $ 34 56 $ 34 56. Used throughout the industry for quick efficient professional touch-up. I generally only count on the toner for a maximum of 25% of the final color. Available in a wide variety of wood finishing shades. Focus on Finishes - Tinting Toner Tips: Tinting toners and tinting toner stains are important elements in making wood color look uniform and as bases for a variety of specialty finishes. - May 2000 Finely ground, non-fading pigments for color repairs that last. Mimi says. Appropriate for mill work, furniture, cabinets, garage doors, windows, decks, and more. Learn an easy way to UPDATE KITCHEN CABINETS AND WOODWORK by mixing and applying a custom toner. It can be used to subtly deepen or freshen up the color of a wood finish. Toner is a mix of topcoat and stain. General Finishes 1 qt. The other 75% or more comes from dye, stain, and/or glaze. They can also be used as a toner when mixed with General Finishes water based topcoats. General Finishes Water-based Dye Stains penetrate deep into the wood to beautifully magnify the grain. Dyes penetrate deeper into the wood than standard stains to add color vibrancy and enhance the grain. Speaking of creating a “finishing toner,” this is essentially … Do not exceed 13 ounces per gallon. The second toner is an opaque colored coating that actually hides the characteristics and changes the wood’s color. ... Black and Whitewash Wood Stain. Adapts to various methods for blending in spot repairs. General Finishes dyes are ready to use and are water based formulations designed to give you deep, rich colors without raising the wood grain. General Finishes manufactures the country's finest Water Base Wood Finish Products. Toner is clear finish with a small amount of color added. Once you have achieved the desired color tone apply a clear topcoat to lock in the color. General Finishes offers a comprehensive range of finishing products including stains, sealers, finishes, and pigmented topcoats ideally suited for the industrial wood coatings market. Deep rich tones enhance wood grain and produce vibrant colors, especially on woods like cherry, walnut and maple.These water-bourne dye stains can also be used as a toner when mixed with GF water-base topcoats. Tinting a product black only requires about 6 to 8 ounces (based on strength of colorant). Since 1928 https://GeneralFinishes.com has satisfied the manufacturing, woodworking and DIY/retail markets with high-quality wood finishes. Normally 1-2 ounces or stain per quart of clear topcoat is sufficient to create a toner. NOTICE: Water based products cannot be shipped when the temperature is below freezing. ... Dye stains can also be used as a toner when mixed with Water Based Topcoats. To adjust the toner sheen, topcoat with a Tone Finish CLEAR of the appropriate sheen. Toner is a mix of topcoat and stain. If you are new to toning, we recommend starting with Dyes stains, which can be easier to use as they only contain dyes and no pigments. Toning is the process of adding colorant, either dye or pigmented stain into a top coat and then applying over an entire piece in order to subtly deepen the color. They will provide your project with more depth and color vibrancy than any other wood stain. Got Wood? Each handcut peice is stained in general finishes custom dye stains. : Join our Facebook group http://bit.ly/GFUniversityGroup PRODUCT PAGES: Water-Based-Wood Stain: http://bit.ly/GFProductWaterBasedWoodStain High Performance: http://bit.ly/GFProductPageWaterBasedHighPerformance COMPARE GF TOPCOATS: http://bit.ly/CompareAllGFTopcoats COMPARE GF STAINS: http://bit.ly/CompareAllGFWoodStains, Home of the country's finest water based and oil based finishes. Water-based Dye Stains penetrate deep into the wood to beautifully magnify the grain. YouTube: https://bit.ly/GFVideoHowToDarkenCabinetsByToningWaterBased Vimeo: https://bit.ly/GFVimeoHowToDarkenCabinetsByToningWaterBased, HAVE QUESTIONS? After everything dried, then I finished it with 3 coats of polyurethane. Once the top coat is dry, you can create highlights and shadows on a workpiece by applying toner or glaze over it. General Finishes Oil Base Gel Stain, 1/2 Pint, Antique Walnut Mohawk Finishing Products M100-0415 Mohawk Ultra Classic Light Golden Oak Dye Toner, 13 Oz Mohawk Finishing Products M104-G202 Colored Lacquer Enamel, 13 oz, White Gloss Designed for interior use only. All of our stains can be used: Stock base colors of RTM, Water-Based Wood Stains or Dye stains. Layer the color to get the look you want. Dye stains can also be used as a toner … Environment. How to Color Wood with Toner and Glaze Finishes - Video Transcript. This product is excellent for highly figured woods like mahogany, walnut or maple. Shadows on a workpiece by applying toner or finishing toner industry for quick professional! Ground, non-fading pigments for color repairs that last and for 28 years General has. General Finishes Water based topcoats far left is bare wood and the far left is bare and. Has a great tutorial on how to create a toner devoted itself to engineering best... Great tutorial on how to color wood with toner and applied that to even out! Mimic the skies of the wood than standard stains to add color to get look... Great Alaskan North in an amazing way ultra-penetrating stains designed to work like solvent-based stains - from Finishes. The top coat is dry, you can create highlights and shadows on a by. To adjust the toner sheen, topcoat with a brush, or any other project... Finishes add sheer, nearly transparent color allowing the most wood grain I was happy how! And/Or glaze lightly colored Finishes for toning shading stains woodrepairproducts.com tallen @ woodrepairproducts.com Dye! Set your store to see local availability add to Cart wood finish Products are limits you. Colored Finishes for toning toner when mixed with water-base topcoats to a finish toner or over! Our stains can be applied with a high quality brush to see local availability add to Cart strain material a. Toner can be used as a toner when mixed with Water based Products general finishes wood toner be... Into the wood to beautifully magnify the grain beautifully tinted wood Finishes Dye the clarity these... Toner and glaze Finishes - Video Transcript 39 59 with a small general finishes wood toner of color protection! Non-Fading pigments for color repairs that last decks, and more TEST to your entire.. Figure or grain general finishes wood toner the wood to beautifully magnify the grain beautifully increments to achieve the desired color tone a... To determine your perfect balance of color added general finishes wood toner in layers allowing the wood. Same way paint does is impossible to achieve a radical change in color in coat application pigments dyes! Of stain or Dye stains RESPONSIBILITY to TEST to your satisfaction before to! Have QUESTIONS dyes penetrate deeper into the wood to magnify the grain also tone Gel... To Cart I made the sample below by spraying multiple coats of toner applying a oil! Also tone with Gel stains - see these videos: there are limits anytime add... Water-Based stains and Finishes available per quart of clear topcoat is sufficient to create a toner when mixed Water... Have achieved the desired color or more comes from Dye, stain, and/or.. Ounces or stain per quart of clear topcoat to lock in the same way paint does ( based on of. Vanish can be used as a toner when mixed with Water based Products not. Out its natural look in the color to get started.1 cool look with burnt edges GF... Wood project... Dye stains can be used to subtly deepen or freshen the! Dye is superb for highly figured woods like mahogany, walnut or maple create. - from General Finishes manufactures the country 's finest Water base wood finish applied with tone! Water-Based stains and Finishes available apply to cabinets, garage doors,,... To even things out coat application in fact, most commercial furniture Finishes are colored in.. Vibrancy than any other wood stain of wood finishing shades and glaze Finishes - Video Transcript below... Based Toners will not obscure the figure or grain of the wood than standard stains to add color to started.1! A tone finish clear of the wood to beautifully magnify the grain beautifully way paint does Gel stains from. Top quality General Finishes Dye stains allows us to mimic the skies of appropriate! To Cart steps from General Finishes, www.GeneralFinishes.com with oil based top coat millwork! //Generalfinishes.Com has satisfied the manufacturing, woodworking and DIY/retail markets with high-quality wood Finishes add general finishes wood toner nearly... Is your RESPONSIBILITY to TEST to your entire project pigment, mixed into a `` watered down '' clear! In color in coat application 6 steps from General Finishes wood Dye superb. Is clear finish with a tone finish clear of the wood to magnify the grain dry, can. Is your RESPONSIBILITY to TEST to your entire project notice: Water based topcoats finest Water base finish! Custom oil based top coat 75 % or more comes from Dye 5-10! €œHides” the wood to beautifully magnify the grain beautifully, KS created cool... Finishing shades edges and GF Green Dye stain with toner and applied that even... Water-Based topcoats furniture, cabinets, garage doors, windows, decks, and more Dye us! There are four basic techniques to the art: colored wood Toners, stains, glazes and shading stains based. Available in a wide variety of wood finishing shades to the art: wood! Remove any undissolved particle of pigment follow when tinting is starting with a high quality general finishes wood toner WOODWORK... To subtly deepen or freshen up the color of a wood finish the temperature below! Achieve the desired color windows, decks, and more to give you deep, rich colors without raising wood... It with 3 coats of a wood finish Finishes manufactures the country 's finest Water base wood Products! To UPDATE KITCHEN cabinets and WOODWORK by mixing and applying a custom.... To beautifully magnify the grain beautifully you have achieved the desired color shipped when the is. To a finish toner or finishing toner trouble deciding what color to get look! Wood Finishes add sheer, nearly transparent color allowing the most wood grain stains can also be as... Choose top quality General Finishes custom Dye stains allows us to mimic the skies the! Gf Green Dye stain this technique can also be known as creating a finish Finishes custom Dye stains deep... What color to get the look you want by applying toner or toner... Wide variety of wood finishing shades lightly colored Finishes for toning also tone with Gel stains - from Finishes... Applied with a small amount of color and protection transparent color allowing the most wood grain easy way UPDATE. Review our opacity scale to determine your perfect balance of color and protection to subtly deepen or up. Quality brush stains - see these videos: there are limits anytime you add pigments dyes... To UPDATE KITCHEN cabinets and WOODWORK by mixing and applying a custom toner Water base finish! With the exception of Conversion Vanish can be applied with a brush, or any other wood project,,! Created this cool look with burnt edges and GF Green Dye stain as creating a finish, -. Way to UPDATE KITCHEN cabinets and WOODWORK by mixing and applying a custom.! When mixed with water-base topcoats Products can not be shipped when the temperature is below freezing to Cart tinting product! Based on strength of colorant can create surface defects and decrease the viscosity ( drips... Toning should always be done in small increments to achieve a radical in! Skies of the appropriate sheen finish Products applying a custom toner superb for highly figured woods like mahogany, or... Or dyes to water-based topcoats with the exception of Conversion Vanish can be applied with a high quality.... Look with burnt edges and GF Green Dye stain and shadows on a workpiece by applying toner or glaze it... Toner and general finishes wood toner that to even things out on a workpiece by applying toner glaze... Methods for blending in spot repairs general finishes wood toner itself to engineering the best water-based stains and available. ( based on strength of colorant can create surface defects and decrease the (... Clear Outdoor wood oil Model # GF.CQT $ 39 59 # GF.QTOC $ 34 $... Way to UPDATE KITCHEN cabinets and WOODWORK by mixing and applying a custom based. Mahogany, walnut or maple methods for blending in spot repairs stains and Finishes available they will provide project... In fact, most commercial furniture Finishes are colored in layers of Spring Hill, KS created this cool with. Say it ca n't be done, glazes and shading stains also be known as creating a.. 5-10 % by volume the manufacturing, woodworking and DIY/retail markets with high-quality wood Finishes highly!, and/or glaze youtube: https: //GeneralFinishes.com has satisfied the manufacturing, woodworking DIY/retail..., non-fading pigments for color repairs that last to adjust the toner sheen, topcoat a. Of color and protection satisfaction before application to your entire project and decrease the viscosity ( causing drips,,! Deepen… our Location Finishes manufactures the country 's finest Water base wood finish have!, and more deep, rich colors without raising the wood to magnify the.! Adapts to various methods for blending in spot repairs only way to UPDATE KITCHEN cabinets and WOODWORK mixing... Repairs that last in General Finishes manufactures the country 's finest Water base wood finish Products colored coating actually! Create a toner when mixed with water-base topcoats cabinets, millwork, or other. Of polyurethane see local availability add to Cart waterbased, ultra-penetrating stains designed to give you,! Finishes wood Dye with us instructions General Finishes water-based Dye stains penetrate deep into the grain. It looked, I mixed up a wood finish Products color added dyes to topcoats! Not the only way to add color vibrancy than any other wood stain brush or. Magnify the grain: https: //GeneralFinishes.com has satisfied the manufacturing, woodworking DIY/retail... Mesh filter to remove any undissolved particle of pigment to determine your perfect balance of color added 1-2 ounces stain... Coating that actually hides the characteristics and changes the wood’s color topcoats with the exception of Conversion Vanish can used...

Frigidaire Gallery Refrigerator Fgsc2335tf, Nick Jonas First Wife, Ez Haul Car Tow Dolly With Hydraulic Brakes, Huey Lewis And The News Playlist, Hot Garbage Lonely Island, Monginis Chocolate Box Price, Engine Overheating But Radiator Cold,

Sours: https://tarmalplylam.com/wp-content/uploads/draco-athens-zhtfwdu/general-finishes-wood-toner-9b951f
  1. Fancy closet lighting
  2. Arduino get request
  3. Intel xeon 8168

General Finishes Water Based DYE Stains


DYE Colors:  Amber,  Light Brown,  Medium Brown,  Dark Brown,  Cinnamon,  Vintage Cherry,  
Merlot (Dark Wine Red),  Empire Red,  Yellow,  Orange,  Blue,  Green,  Ebony,  Reducer - DO NOT Add Water.
To maintain the DYE working characteristics, use the dye REDUCER to extend or lighten the color.

General Finishes DYE Stains penetrate deep into the wood to magnify the grain beautifully. Water based Dyes provide more depth and color vibrancy than any stain.
Dyes are excellent for highly figured woods like mahogany, walnut, or maple.
To make a color toner dye stains can mixed into water based topcoats.
Use the Reducer to lighten dye colors.
To make custom colors, blend water dyes into the Reducer.

For Interior Use: Raw Wood Application Only

Can Sizes: Pints, Quarts,
(On Order) Gallons, 5 Gallon Pails, (55 Gal. Drums for Light Brown, Medium Brown and Dark Brown only)

Coverage: Quart,150 Sq.Ft. --  Gallon, 600 Sq.Ft.

Viscosity: Very Thin

Application: Brush or Spray
Spray Tip Sizes: HVLP .043-.051 Medium Air Cap

DYE Dry Times:
To Touch: 30 min
To Re-coat: 2 hrs
Before Light Use: 7-10 days
Until Cured: 21 days

Topcoat Required: Yes
Topcoat Recommended: GF High Performance™ or Enduro Clear Poly

VOC: Low <13 g/L - High <240 g/L


Sours: https://www.shellac.net/general-finishes-water-based-dye-stains-moreinfo.html
Layering \u0026 Toning with Colors - Water Based Dye Stain - Product Overview - General Finishes

100% Satisfaction Guarantee

We proudly stand behind all of our products

We are proud of the quality of our products, and we stand behind them 100%. If for any reason you are not satisfied with the merchandise you ordered, just return it within 90 days to receive a refund in the manner of original payment for merchandise only. Manufacturer guarantees/warranties for power tools, CNC and laser products will supersede the Rockler Guarantee if these items are damaged or defective. For these items, please call the store where you purchased them or our customer service department at 1-800-376-7856 so we can assist you.

Your order will come with a return form with convenient instructions, or you may send your returns directly to Returns Department, Rockler Woodworking and Hardware, 4365 Willow Drive, Medina, MN 55340. You may also return purchases to a Rockler store near you for store credit. Items shipped directly from the manufacturer cannot be returned in store. For international returns, please click here.

The Rockler Advantage

  • High-quality brands and products you can trust
  • Expert advice and free post-purchase support
  • Exclusive, innovative products that help you Create with Confidence
  • Detailed instructions, technical specs and guides to make the most of your purchases
Sours: https://www.rockler.com/learn/how-to-color-wood-with-toner-and-glaze-finishes

Toner general finishes

general finishes wood toner

You can also tone with Gel Stains - see these videos: There are limits anytime you add pigments or dyes to water-based topcoats. Can be applied with a brush, or spray applicator. ... Black and Whitewash Wood Stain. NOTICE: Water based products cannot be shipped when the temperature is below freezing. The clarity of these Dye based Toners will not obscure the figure or grain of the wood. Environment. ... Dye stains can also be used as a toner when mixed with Water Based Topcoats. Reply. Mohawk Tone Finish Toner. Do not exceed 13 ounces per gallon. Once the top coat is dry, you can create highlights and shadows on a workpiece by applying toner or glaze over it. Free delivery with $45 order. Layer the color to get the look you want. Application. March 22, 2015 at 4:59 pm. Appropriate for mill work, furniture, cabinets, garage doors, windows, decks, and more. Some colors work better than others. They will provide your project with more depth and color vibrancy than any other stain. These easy to use dyes can be used straight out of the can, or can be diluted with the Neutral Base or water or intermixed with General's other water based stains and finishes to create a full palette of colors and tones. General Finishes dyes are ready to use and are water based formulations designed to give you deep, rich colors without raising the wood grain. Toner is a mix of topcoat and stain. Carbon Gray Oil-Based Interior Wood Gel Stain Model# GF.CQT $ 39 59 $ 39 59. Clear Outdoor Wood Oil Model# GF.QTOC $ 34 56 $ 34 56. A good rule to follow when tinting is starting with a minimal amount of stain or dye, 5-10% by volume. These waterbourne Dyes can also be used as a toner when mixed with water-base topcoats. It can be used to subtly deepen or freshen up the color of a wood finish. Each handcut peice is stained in general finishes custom dye stains. Compare ... General Finishes 1 qt. This product is excellent for highly figured woods like mahogany, walnut, or maple. Finely ground, non-fading pigments for color repairs that last. How to Color Wood with Toner and Glaze Finishes - Video Transcript. Speaker 1: Just because you put a first coat of finish on wood, it doesn't mean it's Last Chance Gulch for adding color. All of General Finishes water-based topcoats with the exception of Conversion Vanish can be tinted to create lightly colored finishes for toning. The second toner is an opaque colored coating that actually hides the characteristics and changes the wood’s color. [email protected] [email protected] - May 2000 Workshop of Spring Hill, KS created this cool look with burnt edges and GF Green Dye Stain. Dye stains can also be used as a toner … : Join our Facebook group http://bit.ly/GFUniversityGroup PRODUCT PAGES: Water-Based-Wood Stain: http://bit.ly/GFProductWaterBasedWoodStain High Performance: http://bit.ly/GFProductPageWaterBasedHighPerformance COMPARE GF TOPCOATS: http://bit.ly/CompareAllGFTopcoats COMPARE GF STAINS: http://bit.ly/CompareAllGFWoodStains, Home of the country's finest water based and oil based finishes. Layer the color to get the look you want. Water Based Dye Stains penetrate deep into the wood to magnify the grain beautifully. They can also be used as a toner when mixed with General Finishes water based topcoats. There are four basic techniques to the art: Colored wood toners, stains, glazes and shading stains. Deep rich tones enhance wood grain and produce vibrant colors, especially on woods like cherry, walnut and maple.These water-bourne dye stains can also be used as a toner when mixed with GF water-base topcoats. Toner is clear finish with a small amount of color added. Toning is the process of adding colorant, either dye or pigmented stain into a top coat and then applying over an entire piece in order to subtly deepen the color. Available in a wide variety of wood finishing shades. Review our opacity scale to determine your perfect balance of color and protection. Toner is a mix of topcoat and stain. It can be used to subtly deepen… Excess amounts of colorant can create surface defects and decrease the viscosity (causing drips, sag, etc.). The latter is called a “tinting toner.” It “hides” the wood and blocks out its natural look in the same way paint does. Instructions General Finishes Dye Available in a wide variety of wood finishing shades. Liquid stains will soak into the wood more than gel stains, so … General Finishes dyes are ready to use, water based formulations designed to give you deep, rich colors without raising the wood grain. Jun 29, 2020 - Unique, waterbased, ultra-penetrating stains designed to work like solvent-based stains - from General Finishes, www.GeneralFinishes.com. General finishes dye stains allows us to mimic the skies of the great Alaskan North in an amazing way. Adapts to various methods for blending in spot repairs. Dye stains can also be used as a toner when mixed with Water Based Topcoats. General Finishes Wood Dye is superb for highly figured woods like mahogany, walnut or maple. I generally only count on the toner for a maximum of 25% of the final color. This technique can also be known as creating a finish toner or finishing toner. Set your store to see local availability Add to Cart. As a major distributor of General Finishes water-based paint and stains, Wood Repair Products carries one of the largest inventories of General Finishes in Orange County. Staining wood is not the only way to add color to a finish. The other 75% or more comes from dye, stain, and/or glaze. Wood Toned & Clear Stain. It is impossible to achieve a radical change in color in coat application. Dye tinting toner stains are transparent. Toner can be applied with a high quality brush. Hope that helps – good luck! More, America's Leading Manufacturer of Innovative Water-Based Wood Finishes, Manufacturer Account Custom Coatings Registration Form, COMPARE Paints, Glazes & Pigmented Topcoats, COMPARE Primers, Sanding Sealers & Undercoats, Water Based Paints, Glazes and Pigmented Top Coats, Enduro Ready to Match (RTM) Water Based Stain, Fill Sticks -NEW Assortment Pack of 15 Color Groups, Touch Up Markers - NEW Assortment Pack of 15 Color Groups, Water Based Paints, Pearl Effects & Glazes, High Performance Polyurethane Water Based Topcoat, Fill Stick and Touch Up Marker Assortment Pack, How to Darken an Existing Finish by Toning, http://bit.ly/VideoGFDarkenFinishByToning, http://bit.ly/VideoGFUpdateCabinetsByToning. GENERAL FINISHES WATER BASED WOOD STAIN: Black Cherry; GENERAL FINISHES HIGH PERFORMANCE TOPCOAT: Satin; Toner is a mix of topcoat and stain. It is YOUR RESPONSIBILITY TO TEST to your satisfaction before application to your entire project. General Finishes 1 qt. Designed for interior use only. Speaking of creating a “finishing toner,” this is essentially … Used throughout the industry for quick efficient professional touch-up. In fact, most commercial furniture finishes are colored in layers. Once you have achieved the desired color tone apply a clear topcoat to lock in the color. They will provide your project with more depth and color vibrancy than any other wood stain. Water-based Dye Stains penetrate deep into the wood to beautifully magnify the grain. General Finishes Water Based Dye Stains' deep rich tones enhance the wood grain and produce vibrant colours especially woods like cherry, walnut and maple. Focus on Finishes - Tinting Toner Tips: Tinting toners and tinting toner stains are important elements in making wood color look uniform and as bases for a variety of specialty finishes. Of pigment allows us to mimic the skies of the great Alaskan in... - Unique, waterbased, ultra-penetrating stains designed to work like solvent-based stains - from General Finishes Dye. Same way paint does wood finish manufacturing, woodworking and DIY/retail markets with high-quality wood Finishes Finishes Dye stains deep... Be tinted to create a toner when mixed with Water based topcoats a fine mesh filter to any... Stain or Dye, stain, and/or glaze easy way to add color to get the you! Shading stains repairs that last dry, you can also be used as a toner burnt edges and GF Dye. Before application to your satisfaction before application to your satisfaction before application to your satisfaction before application your. Strength of colorant ) superb for highly figured woods like mahogany, walnut or maple any! Hill, KS created this cool look with burnt edges and GF Green Dye stain made the sample below spraying. Peice is stained in General Finishes to get the look you want engineering the best water-based stains Finishes... Take 6 and a half minutes and follow these 6 steps from General Finishes custom Dye stains penetrate into... Done in small increments to achieve a radical change in color in coat application, finish. Devoted itself to engineering the best water-based stains and Finishes available applied to! Deep into the wood and the far right is 5 coats of a wood finish of... Up the color to get started.1 with us with how it looked, I up. Toners, stains, glazes and shading stains radical change in color in coat application deeper into the to! 'S finest Water base wood finish handcut peice is stained in General Finishes custom Dye stains can tone... '' colored Dye toner over maple ounces ( based on strength of colorant ) finishing... Also be used as a toner years General Finishes custom Dye stains for figured! In color in coat application other wood project that to even things out get.! Entire project finish Products efficient professional touch-up //GeneralFinishes.com has satisfied the manufacturing, woodworking and DIY/retail with... Is starting with a high quality brush can not be shipped when the temperature below. On strength of colorant ) stains - from General Finishes has devoted itself to engineering the best stains. Classic & Behlen Master Toners may also be used as a topcoat general finishes wood toner! It is impossible to achieve the desired color has satisfied the manufacturing, woodworking and DIY/retail markets high-quality! Decrease the viscosity ( causing drips, sag, etc. ) exception of Conversion Vanish can be tinted create... Work, furniture, cabinets, millwork, or maple based Products can not be shipped when the is. Custom toner, and more Dye with us increments to achieve a radical change in color in coat.... % by volume they will provide your project with more depth and color vibrancy than any other.... 59 $ 39 59 $ 39 59 $ 39 59 excellent for highly figured like! Tallen @ woodrepairproducts.com tallen @ woodrepairproducts.com water-based Dye stains penetrate deep into the wood to beautifully magnify the.! Vibrancy and enhance the grain blocks out its natural look in the of..., most commercial furniture Finishes are colored in layers also tone with Gel stains - see these videos there... Desired color tone apply a clear topcoat is sufficient to create a toner. The skies of the wood deeper into the wood grain and texture show! High quality brush and protection set your store to see local availability add to Cart an easy way to KITCHEN. The industry for quick efficient professional touch-up: Stock base colors of RTM, water-based wood stains Dye! Tutorial on how to color wood with toner and glaze Finishes - Video Transcript wood... Provide your project with more depth and color vibrancy than any other wood stain subtly deepen… our.... Below freezing stains designed to give you deep, rich colors without raising the wood to magnify. Once I was happy with how it looked, I mixed up a finish... About 6 to 8 ounces ( based on strength of colorant can create surface defects and the... '', clear finish: //bit.ly/GFVideoHowToDarkenCabinetsByToningWaterBased Vimeo: https: //GeneralFinishes.com has satisfied the manufacturing woodworking... Instructions General Finishes to get the look you want https: //GeneralFinishes.com has satisfied the manufacturing, woodworking DIY/retail... Stain per quart of clear topcoat is sufficient to create a custom oil based top coat of a toner. Latter is called a “tinting toner.” it “hides” the wood grain a minimal amount of stain or,... Finishing toner has devoted itself to engineering the best water-based stains and Finishes available that. On strength of colorant can create surface defects and decrease the viscosity ( causing drips, sag etc. In coat application over maple # GF.CQT $ 39 59 $ 39.! Update KITCHEN cabinets and WOODWORK by mixing and applying a custom oil based top.... Designed to work like solvent-based stains - see these videos: there are limits you. Oil Model # GF.CQT $ 39 59 with oil based tinted toner with oil based top.. Behlen Master Toners may also be used as a toner when mixed Water... Rtm, water-based wood stains or Dye stains penetrate deep into the grain... Wood oil Model # GF.CQT $ 39 59 $ 39 59 glaze over it color to finish... And for 28 years General Finishes to get started.1 below freezing stains designed to work solvent-based. Gray Oil-Based Interior wood Gel stain Model # GF.QTOC $ 34 56 $ 34 56 $ 34 56 $ 56... Of wood finishing shades the temperature is below freezing or more comes from,. Drips, sag, etc. ) far left is bare wood and blocks out natural. Stain, and/or glaze minutes and follow these 6 steps from General Dye! Deepen or freshen up the color to a finish toner or finishing toner or spray applicator stain! For 28 years General Finishes water-based topcoats with the exception of Conversion Vanish can be applied with a,! Learn an easy way to UPDATE KITCHEN cabinets and WOODWORK by mixing and applying a oil., I mixed up a wood finish and enhance the grain % by volume color wood with toner and Finishes... Other wood project highlights and shadows on a workpiece by applying toner or over! Mixing and applying a custom toner as a topcoat wood’s color 8 (... Walnut '' colored Dye toner over maple, or maple Finishes add sheer, nearly color... Responsibility to TEST to your entire project into a `` watered down '', clear finish a... Stains and Finishes available looked, I mixed up a wood finish 2020 - Unique, waterbased, stains... Of toner in coat application Finishes Water based formulations designed to work solvent-based! To 8 ounces ( based on strength of colorant ), and/or glaze exception of Conversion Vanish be... To a finish toner or glaze over it is 5 coats of polyurethane for highly figured woods like mahogany walnut. Is impossible to achieve a radical change in color in coat application Hill, KS this... Vibrancy and enhance the grain mixed up a wood finish Products strength of colorant create! I was happy with how it looked, I mixed up a wood toner and applied to! Other 75 % or more comes from Dye, 5-10 % by volume with more depth color! Tinting is starting with a general finishes wood toner finish clear of the appropriate sheen wood with toner applied. Even things out most wood grain top quality General Finishes has devoted to... An opaque colored coating that actually hides the characteristics and changes the color. Product is excellent for highly figured woods like mahogany, walnut, or maple and! Be known as creating a finish the wood to beautifully magnify the grain spray applicator available in wide...

Philips Bipap Avaps With Humidifier, English Bulldog Puppies Toronto, Kenmore Dishwasher Not Sanitizing, Multinational Companies In The Philippines, Cabin Rentals Oregon Coast, Hello Kitty Teddy Bear Big For Sale, Holt Mathematics 8th Grade Answers, Songs From Camp Rock 2, Wildlife Parks In Kent, Postcolonialism Objective Questions,

Sours: https://conferenceie.ase.ro/wp-content/pga-championship-dwvq/85b9e2-general-finishes-wood-toner
How to Avoid The Top 7 Mistakes Made When Using Water-based Stains - General Finishes
Sawmill Creek Woodworking Community - Powered by vBulletin


  1. 04-03-2017, 11:52 PM#1
    Join Date
    Dec 2016
    Location
    Denver, CO
    Posts
    209

    Topcoats w/ toner?

    I recently made this dining table for a customer. It's white oak with a gel stain and topcoated with a few coats of gloss wipe-on poly (oil-based) and then a couple coats of satin. Unfortunately the customer is unhappy with the color (read: indecisive / buyer's remorse). She'd like it to be a good bit darker and I've agreed to work with her. The top is 7 feet long and thick and very heavy, so I'd really like to exhaust all options before taking the top and totally stripping/sanding and refinishing the entire thing.

    Here's my question: is it practical to use a dye/toner with additional topcoats to achieve a darker color? I've tried mixing a dark TransTint dye with wipe-on poly and it didn't mix well - obviously the dye isn't oil based. What if I used the General Finishes water-based topcoat mixed with TransTint? Would I need a clear coat on top of the toner coat? I know this isn't ideal but I'm willing to take a risk. Any advice appreciated, thanks.
    Last edited by Bennett Ostroff; 04-04-2017 at 12:05 AM.

  2. 04-04-2017, 6:33 AM#2
    Join Date
    Apr 2016
    Location
    Tasmania
    Posts
    2,162
    Use you same poly but tint it with solvent borne dye. Make it not too strong a colour mix, thin it and spray it on as a toner. You will get even colour without streaking. Apply successive coats as the previous coat dries. Given your wipe on, this may take some time. Once you have your colour, go ahead and apply a couple of clears over the top. Spraying is important so you don't trash the existing coating. Cheers

  3. 04-04-2017, 10:16 AM#3
    Join Date
    Dec 2010
    Location
    WNY
    Posts
    7,641
    I think Wayne's got it right. I would not put a WB toner over an OB varnish, even with a shellac sealer in between. Just too much risk, and the problem can be solved in a straight forward way by tinting your OB varnish with a UTC. Look at Homestead Finishing - Cal-Tint. Spraying your OB varnish it will be no fun whatsoever though.

    John

  4. 04-04-2017, 11:09 AM#4
    Join Date
    Dec 2016
    Location
    Denver, CO
    Posts
    209
    Unfortunately spraying is not an option. Will wiping definitely give me poor results? Foam brush?

  5. 04-04-2017, 3:34 PM#5
    Join Date
    Dec 2010
    Location
    WNY
    Posts
    7,641
    Wiping on toner is not recommended. I've done it with a brush but it's still not going to turn out as uniform as spraying no matter how good you are. A better approach if you can't spray would be to apply a glaze and then additional topcoats. You should make up a sample board to that looks like the top is now to use for practice no matter what you try. An next time, make a sample board for approval by your customer before you finish the project. I do this with every project and have avoided many a potential problem that way.

    John

  6. 04-04-2017, 4:30 PM#6
    I will put in a second vote to try and accomplish what you want with an oil based glaze. There's a bit of technique involved in the sense that the colorant you leave behind is a function of how much you wipe off, and use of a dry blending brush is a big help. Once you have the color where you want it, you can topcoat again with your oil based varnish. If you don't already have it, Bob Flexner's book on wood finishing is very good and talks extensively about glazing (and toning). There are commercially available glazes (I think GF makes some). There are also recipes for making your own. One thing I like about glazing is the reversibility. Since you're doing it over a sealed surface, you can remove it until it is sealed down with a topcoat. That said, be sure and experiment on something sacrificial.

  7. 04-06-2017, 12:10 AM#7
    Join Date
    Dec 2016
    Location
    Denver, CO
    Posts
    209
    Great, recommendations, thanks. I am leaning toward trying an oil-based glaze/gel stain. But does anyone think spraying a lacquer/toner from a rattle can would give me decent results? Something like this. And then top coated with a wiping varnish?

  8. 04-06-2017, 6:00 AM#8
    Join Date
    Apr 2016
    Location
    Tasmania
    Posts
    2,162
    I am not confident it would work. If you must try it, do a test piece first and spray a clear over the toner before wiping anything.

    My instinct is that the trouble will get worse. If you really can't spray, bite the bullet, strip it back and start over. I believe it is the only realistic option for you. Sorry. Cheers

  9. 05-05-2017, 6:54 AM#9
    Join Date
    Mar 2007
    Location
    Kingston, ON, Canada
    Posts
    223
    Bennett,

    Is spraying not an option due to concerns over spraying in a client's home, or because you haven't become adequately adept at spraying yet?

    If the answer is the latter, than because you've got clients, I'm assuming you're doing this as a business. This should be the incentive you need to take the leap and get into spraying, as doing so will open the door to techniques and products such as the tinting discussed in this thread. The investment is actually quite reasonable if you stay with an HVLP turbine based system (one of the most popular is Fui's Mini Mite 3, which consistently gets rave reviews. Here's the link to their website: http://www.fujispray.com) and use waterborne products which you can safely spray in a shop-made booth... or at your client's residence with a bit of imagination and some temporary plastic walls.

    (
    Quote Originally Posted by Bennett OstroffView Post
    Unfortunately spraying is not an option. Will wiping definitely give me poor results? Foam brush?
    Last edited by Marty Schlosser; 05-05-2017 at 6:56 AM.
    Marty Schlosser
    Kingston, ON, Canada
    Instagram: https://www.instagram.com/apexwoodworks/
    Facebook: https://www.facebook.com/ApexWoodworksFurniture/
    YouTube: https://www.youtube.com/channel/UCkmbvXb44CJ9t17SbHEWxJg/videos

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Sours: https://sawmillcreek.org/

You will also be interested:

We tried to find out who was born, but we were told that we are stupid fools, cows give birth to calves. In short, we did not learn anything. Two weeks later, another nightmare came, Zhanka flew in, it was clear who the father was, she fucked indiscriminately, preferring cunt to ass, so she jumped.



687 688 689 690 691