Revit Keyboard Shortcuts
Revit Selection Options
There are several ways to select multiple objects in Revit – See how many you know from the list below:
1. Click on the first object and then Ctrl+click on additional elements to add to the current selection.
2. Shift+click to remove an element.
3. Draw a Selection Box by placing the cursor on one side of the elements to be selected and dragging it diagonally to form a rectangular boundary.
- To select only elements that are completely within the boundary of the selection box, drag the cursor from left to right.
- To select any elements that are wholly or partially within the boundary of the selection box, drag the cursor from right to left.
4. Hover over an element and press Tab to highlight connected elements, and then click to select.
5. Determine how many elements are currently selected click on the Filter tool in the Selection panel of the Modify | Multi-Select. This will indicate the total number of selected items and allow you to de-select objects that have been selected by Category.
6. Pressing Ctrl+left arrow allows you to re-select the previously selected elements (or right mouse click Select Previous)
7. If the same elements need to be selected more than once, then the selection can be saved into a selection filter from the Save tool in the Selection panel of the Modify | Multi-Select.
Filters can then be recalled when required from the Manage tab> Selection> Load
8. Selection Filters can also have visibility parameters assigned via the Visibility Graphics dialog.
9. Right-click an element in any view, or a family type under the Families node of the Project Browser. Click Select All Instances, and then click Visible in View or In Entire Project.
NOTE: While using Design Options, the Select All Instances command displays as Select All Instances in Active Option, and the Visible in View/In Entire Project commands only select the elements in the current design option.
10. How about using Schedules... Selecting objects in a schedule, will highlight them in any view they are visible.
NOTE: From the ribbon click Highlight in Model from the Element panel under Modify Schedule Quantities.
I hope you've enjoyed this little Autodesk Revit tip. If you'd like to learn more about how to make the most of Revit and other products in the AEC Collection, why not join our free Revit webinars? Alternatively, you can ask our tem for more information or a quote by following the link below:
Revit basic tip: Selecting objects
Selecting objects is one of the basic tools you should know. You will use it a lot. You may need to select many objects at once. Or probably all objects in the same category.
I see in one of my training class, the students are struggling with this. So I thought it would be useful if I share this here. You probably will find it useful as well.
Noun verb selection vs. verb noun selection
Revit allows you to select object first then activate a modify command. This is called noun verb selection. Whenever you select object first, Revit will open contextual tab: modify. You don’t have to change to ribbon tab to modify first.
Revit also allows you to initiate the command first, then select the objects. To end object selection, press ENTER or SPACE. This is called verb noun selection. This is probably preferred for shortcut users. If you don’t know the modify command shortcut, you will need to switch to modify tab first.
Both work the same way.
Remember: For noun verb selection, you need to activate modify tool before selecting objects.
Now let’s see how we can select objects in Revit.
1. The basic: Clicking the objects
The most basic method is by clicking object you want to select. Move your pointer above an object. When it’s highlighted, click you mouse button.
If you want to add more objects to your selection, hold CTRL key. You will see (+) sign near your cursor. Click to select more objects.
If you want to remove objects from your selection, hold SHIFT key. (–) sign will appear near your cursor. Click selected object to remove it from selection.
2. When it gets crowded: Cycle between objects
When you have quite a lot of objects, you will see your objects are overlapping. You can cycle between overlapping objects by pressing TAB key. After you see the object you want highlighted, click your mouse.
Press TAB slowly, especially if you are new with this. Not only see the highlighted elements in your view, watch the status bar (or tooltips) to see if the highlighted object is correct.
3. To select many: Drag a window selection
You can also select many objects at once by dragging a window selection. When modify tool is active, click and hold your left mouse button. Make a window selection then release the button. Simple.
One thing you should know though:
When you create the window selection from left to right, we call it window selection. You can see the window as continuous line.
When you create the window selection from right to left, we call it crossing window selection. The window is shown as dashed line.
|Window selection||Crossing window selection|
Window selection will select objects that lies completely inside the rectangle. If only some part of the object is inside the rectangle, then it will not be selected.
Crossing window polygon will select objects inside and touching the selection window.
4. To select many in a category: Filter selection
You can use window selection to select many objects at once. But this is usually useless. By using window selection, you select every object within the window. Mostly we need to modify objects in the same category or the same family.
You can filter objects from your selection by using selection filter. You can combine filter with selection window. After you select objects, you will see modify contextual tab. Click filter in selection panel.
The opened dialog box will show you all category in your selection. You can uncheck what you want to exclude from selection. Or you can click Check None, then choose only categories you want to select.
Click OK to apply filter.
5. To select many with the same family and types
Using filter is very helpful. However, It selects all objects in the same category. It means it will select all doors regardless the family name and type.
You might need to choose only objects with the same family and type. You can use contextual menu to do that.
Using contextual menu in view
Contextual menu for selecting similar object is available in view. Select the object in view then right click.
Using contextual menu in project browser
You can also select objects by family name and type from project browser. Expand families group, then find the type you want to select. Right click, then choose from select all instances. This is very useful if you know the family type, but you don’t know where they’re placed.
6. To reselect previous selection
If you need to reselect the same objects after doing an action. You don’t have to pick the objects, using window selection or filter to select them again.
Simply press Ctrl + Left Arrow on your keyboard. Or you can right click your mouse and click select previous from contextual menu.
7. To save and load your selection
Select previous is useful if you want to reselect object immediately. But if you need to reselect some objects repeatedly during your design, you need to save your selection.
You can save your selection by clicking save in selection panel, modify contextual tab.
To load your selection, you can use load button from Manage tab> Selection panel. You can also edit your saved selection later.
To sum up
Selecting objects is very important in Revit. You will need to copy objects, erase, or change the object’s properties.
When you have complex design, you will need to know all the selection method to make it easier.
Do you have your favorite method? Do you have any experience when selecting objects you want to share?
About Edwin Prakoso
I work as a Sr. Technical Consultant in Tech Data Advanced Solutions Indonesia. I've been using AutoCAD since R14 and Revit since Revit Building 9. I occasionally write for AUGIWorld magazine and also active in Autodesk discussion forum.
I'm an Autodesk Certified Professional (ACP) for Revit Architecture and AutoCAD. I'm also a member of Autodesk Expert Elite, appreciation for individuals who give contribution to Autodesk community.
Connect with me on twitter or LinkedIn
Filed Under: RevitTagged With: filter, save selection, selectionSours: https://www.cad-notes.com/revit-basic-tip-selecting-objects/
You will kiss her star, - she suggested. In the evening I came to their room. Nina was just bathing Katya. She wiped it off with a towel, wrapped it in it and shouted to me: Sasha, take the mermaid. '' I picked up Katya in my arms and carried her to the bed.
Revit select all
The long-awaited Saturday came and Lena was already standing near the poster and waiting for Anya. The minibus stopped and some girl jumped out of it. It was Anyutka. She was dressed in a sports jacket and it was simply not recognizable.Revit: Paste Aligned to Selected Levels
And what do you want, he asked. I told him that Ive found out about this parking lot on the Internet, and out of curiosity, I came, and, finally, Im not looking for anything. Special. Then he asked me if it would give me joy to suck and fuck a little.
Juice flowed from Her pussy, dripping onto the chair and carpet, leaving small wet marks. She reclined in a large armchair with legs spread wide, which were comfortably settled on the armrests. Her chest heaved with deep and rapid breathing. The mouth was parted and from time to time sweet moans escaped from the lips.