Ezgo spindle bushing

Ezgo spindle bushing DEFAULT

98 EZGO TXT Spindle Bushings

Gone Wild

 
DaveTM's Avatar
 

Join Date: Oct 2012

Location: Southwestern Pa.

Posts: 4,855

DefaultRe: 98 EZGO TXT Spindle Bushings

I've not done this to a cart.....but in a past life....like 40 years ago when I was young and healthy....and bought nothing but $200 cars that always needed ball joints,.....I did a youtube search and took a look at this spindle lift install video: https://www.youtube.com/watch?v=_sG5Wj5Hg_g

Now, I'm not sure if your saying the hub is "galled" onto the spindle, or the spindle is is galled onto the King-Pin? (See the video) However, whichever one you have....it may be or may not be a serious issue. If it's the hub that you can't get off, you may want to "flood" it with a penetrating oil and let it sit for a day and go back at it. Another approach would be to remove the spindle with the hub attached, and attempt to remove the hub that way....since you would have the ability to get better leverage on the hub...while protecting it.

I suppose the worse case would be you would have to replace the spindle.

Again, I haven't done this, but perhaps these suggestions will help.

Dave

Sours: https://www.buggiesgonewild.com/showthread.php?t=106667

Kingpins & Spindles

ST22-751 - Spindle Thrust Washer, Stainless Steel

Stainless Steel Front Spindle Thrust Washer for E-Z-GO built from January 2001 and newer +++ Also January 2001 and newer E-Z-GO, Jacobsen and Cushman industrial carts models MPT 1000, Industrial 1000, Commander 2100 and Jacobsen Hauler 1000.

Part Number: ST22-751

ST22-785 - Spindle King Pin Tube

Spindle King Pin Tube for 1994 to 2000 E-Z-GO gas and electric models TXT, Medalist, 4 and 6 Passenger Shuttle, ST Express and Workhorse 800, 1000 and 1200 Models.

Part Number: ST22-785

ST22-782 - Spindle Pin Bolt

Spindle Pin Bolt for 1994 to 2000 E-Z-GO gas and electric models TXT, Medalist, 4 and 6 Passenger Shuttle, ST Express and Workhorse 800, 1000 and 1200 Models.

Part Number: ST22-782

Retail:$19.95
On Sale:$14.67
You Save:27%
ST22-784 - Spindle Pin Bolt

Spindle Pin Bolt for 2001 to 2018 E-Z-GO gas and electric models TXT, Medalist, 4 and 6 Passenger Shuttle, ST Express and Workhorse 800, 1000 and 1200 Models. and others.

Part Number: ST22-784

Retail:$7.95
On Sale:$5.37
You Save:33%
ST22-783 - Spindle Pin Bolt

Spindle King Pin Bolt for 1996 and newer gas and electric models ST350 and 1200 workhorse.

Part Number: ST22-783

HW41-021 - 1"-14 Castle Nut

1"-14 Front Spindle Castle Nut for 2000 and newer Columbia Par Car Burden Carrier Payloader models BC2, BC3 and B4 +++ Front Spindle Castle Nut for 1978 to 1982 Nordskog model 262 and 264 Cargo Carrier and 1983 and newer Nordskog and US Electricar Legend models 280 and 282 series A,B,C and D +++ Also Front Spindle Nut for all 1965 to present E-Z-GO four wheel models..

Part Number: HW41-021

Retail:$5.41
On Sale:$3.32
You Save:39%
ST22-760 - King Pin Bushing

Bronze King Pin Bushing for 1980 to 2005 E-Z-GO gas and electric models... Also E-Z-GO industrial vehicles with front hydraulic brakes ... Also Upper King Pin Bushing for 1971 to 1979 Taylor-Dunn model B-248 and others... Also Upper King Pin Bushing for 1960s and 1970s Legend models EV-04 and RV-04.

Part Number: ST22-760

ST88-020 - King Pin Bushing

Oil Impregnated King Pin Bushing for 1972 to 1975 Taylor-Dunn Tee Bird models GT360 and GT361 +++ 1975 to 1985 Taylor-Dunn Tee Bird models GT370 and GT371 +++ Lower only on 1971 to 1979 Taylor-Dunn model B-248 +++ Also lower King Pin Bushing on 1960s to 1980s Legend models EV-4 and RV-4.

Part Number: ST88-020

ST22-781 - King Pin

King Pin for for 1990 to 1994 E-Z-GO Pre-Medalist Marathon model +++ 1991 to 1994 gas and electric PC4X, GX, and GXI models +++ 1993 to 1996 gas and electric XI 300, 500 and 804 models.

Part Number: ST22-781

ST22-770 - Front Spindle, NLA

NO LONGER AVAILABLE +++ Right Passenger Side Spindle Assembly for 1989 to 1994 E-Z-GO Pre-Medalist Marathon model +++ 1991 to 1994 gas and electric PC4X, GX, and GXI models +++ 1993 to 1996 gas and electric XI 300, 500 and 804 models.

Part Number: ST22-770

ST22-780 - Spindle Assembly, NLA

NO LONGER AVAILABLE +++ Left Drivers Side Spindle Assembly for 1989 to 1994 E-Z-GO Pre-Medalist Marathon model... Also 1991 to 1994 gas and electric PC4X, GX, and GXI models... Also 1993 to 1996 gas and electric XI 300, 500, and 804 models.

Part Number: ST22-780

ST22-800 - Front Spindle, Left, BO

CURRENTLY ON BACK ORDER +++ Left Drivers Side Spindle Assembly for 1994 to early 2001 E-Z-GO Medalist and TXT models.

Part Number: ST22-800

ST22-072 - Idler Arm Bushing

Brass Flanged Idler Arm Bushing for 1980 to 1994 E-Z-GO Marathon models +++ Idler Arm bushing for 1960s to 1970s Legend models EV-4 and RV-4 +++ Idler Arm bushing for 1960s to 1970s Legend models EV4-01 and RV4-01 +++ Also Jacobsen four wheel cart.

Part Number: ST22-072

ST22-752 - King Pin Spindle Bushing, Lower

Lower Kingpin Flanged Spindle Bushing for 2001 and newer E-Z-GO TXT model +++ 2001 and newer E-Z-GO, Jacobsen and Cushman industrial carts models MPT 1000, Industrial 1000 +++ Cushman Commander 2100 and Jacobsen Hauler 1000.

Part Number: ST22-752

ST22-786 - Spindle King Pin Tube

Spindle King Pin Tube for 2001 and newer E-Z-GO TXT and Medalist as well as 4/6-Passenger Shuttle, ST 400, Woods Boundary MAV 400 +++ ST Sport, ST Sport II, ST Sport 2+2, ST Express +++ Clays Car, Workhorse MPT (Multi-Purpose Truck) models 800, 1000 and1200 +++ Refresher, Refresher 1200 +++ Cushman 2, 4 and 6 Passenger Bellhop, Cushman 280, and Cushman Commander 2200 Vehicles.

Part Number: ST22-786

ST22-753 - King Pin Spindle Bushing, Upper

Upper Kingpin Spindle Bushing for 2001 and newer E-Z-GO TXT model+++ 2001 and newer E-Z-GO, Jacobsen and Cushman industrial carts models MPT 1000, Industrial 1000 +++ Also Commander 2100 and Jacobsen Hauler 1000.

Part Number: ST22-753

Sours: https://www.vintagegolfcartparts.com/
  1. Carports macon ga
  2. Dynex charger cable
  3. White marsh nissan
  4. Pg corrections jobs

Spindle Bushing w| Flange - 2001-Up EZGO TXT

Golf cart hard parts are those that you cannot live without. They accomplish tasks that you have to have done to get things moving or keep them in that fashion. Parts like the E-Z-GO TXT Flanged Spindle Bushing are those that support the front end of your caddie. We have heard from customers that they are willing to live with these being worn out if all they have to worry about is a minor camber issue; it is not worth their time or money. But is it?

Let us tell you that is the wrong way to look at things. If one of your golf cart flanged spindle bushings were worn out, it would cause the tire on either the driver's or passenger's side to wear out very quickly. Depending on how often the vehicle gets driven, seeing this after a couple of days is not unheard of. Make sure this is not you, and give Buggies Unlimited a call now.

Specifications:

  • Spindle bushing w/flange
  • Fits E-Z-GO Gas & Electric 2001-up TXT
  • Replaces E-Z-GO OEM Number(s): 70648-G01
Sours: https://www.buggiesunlimited.com/golf-cart/spindle-bushing-w%7C-flange-2001-up-ezgo-txt/8341
Toyota Spindle Bushing upgrade to bearings

A friend looked at us in fascination, then crawled under me and I felt that my testicles fall into her mouth and my crotch tickle. On her tongue. After 5 minutes of such pleasure, I decide to stop to leave energy for the most beloved part of love pleasures.

Bushing ezgo spindle

She was just about to grab the handle when the door swung open in front of her. Leaving the room, a tall, completely naked woman almost collided with her. The second woman is slim and black-haired. Heavy chest and fairly narrow waist.

EZGO Lift Kit - How To Install Spindle Kit on TXT Golf Cart

And what surprised me: this time Oksana began to "massage" my penis with interest, and she pursued the same goals as. Oh, how nice it was. My nature at such moments did not exactly stand, it literally cracked from excessive internal pressure. And dexterous girls Rustem looked at me frankly viciously.

Now discussing:

Galya lands uncertainly between my legs, Buzya blindfolds her, and I, clasping Galina's head with my hands, begin to direct her. Mouth to my penis. "Here's a ponytail, take it in your mouth!" - I said, and Galya obediently placed my penis in her mouth and immediately began to touch. It with her tongue.



747 748 749 750 751